Recent content by SgtLee511

SOLD Complete 273 rocker set, shafts, spacers, bolts, and pushrods for 340. The push rods are brand new, and the rockers have brand new adjusters. $200.00 SHIPPED

Ill work a bit more on Saturday on it, The timing mark is painted white, I marked it clearly on the groove, I could not feel it on the bottom and couldn't see it well where the hose is but, Ill double check sat. I went dot to Dot with this cam on set up, I did not centerline it, as most of the...

Many years ago, like 30 i had this happen, I had mopar racer friendfix it at his shop, Hes deceased, so I cant ask what he did. The cover actually came off a 70 340, now I couldnt tell you if it was a for sure 70 cover, but it looks like my 72 cover. Here's a pic rotor towards 1, piston at top...

Well right off the top, i have no timing marks showing, so theres is a problem, i have 1 up at top, and the rotor pointed in the direction of #1, I have done a spark test with the plug wire and screwdriver grounding it, getting about 1/4 spark, so Im fubar its has to be timing chain related...

GOTCHA

Thank You 67Dart, I agree Ill go days screwing with the dam thing, already frustrated. I will run thru your suggestion....as soon as can

Thats where Im coming from, It was running before, i tore it down but i discovered strange burns between coil wire and cap, the spark is there at the plug but, i think its not as bright as it used to be, and i was grounding the plug to look at the spark,like you u mentioned

Will do0

Yep gas and air lol, ill try again tomorrowl its just stangely inactive , had this car 40 years, i know it well, but something's off

Gentleman and Ladies, heres my issue new cam, installed, new carb 340 engine, Ive got fire at the plugs, but im not getting any backfire thru carb,no signs its firing,yet i can see it fire, at plug,i had noticed some burns on the top of the cap at the coil wire so i replaced cap, rotor and coil...

member: 44618"]I see you're adjusting screws are a miss matched set. You have some screws with nuts and some interference fit screws from Factory 273. You need to buy a couple more adjusting screws with nuts from Summit Racing to complete your set. You need to remove those rocker arm shafts from...

So i have notch backwards?

Pushrods for hydraulic cam,

Got the comp cam ones,used with those rockets

Excellente