Recent content by Sixpack_Sid

Good news and bad news-the new brake pads fit and the rotors will spin now. But, the brakes don't stop well now. And when I step on the gas, I really have to hammer it for it to move. Not sure what's going on here. I did adjust the front band to 72" and backed off 2 & 1/2 turns. Does that need...

yes

Good idea. I did find another brake pad with a thinner spec. I will try those and if I still have problems, they're going on the belt sander! Thanks!

It is original equipment. The piston is all the way into the caliper. I have found that the specs are different in other manufacturers. I bought another set and we'll see what happens when they arrive. Thanks!

I have been having trouble with my front brakes locking up. I replaced the brake hoses and the calipers. I ordered new rotors and pads. When I put tried to put them on, they wouldn't fit on the rotor. It's almost like the pads are too thick. When I matched up the new pads, the one pad is...

I rebuilt my 727 trans last year and put in a trans go shift kit in it. I bought a 440 from a motor home with trans I switched the tail housing when I had it all apart. I also put a sidewinder shifter in it. So now I got the car all assembled and ready for a test ride. It moved forward about 4...

I tore the dash apart and found a flasher in the dash that I wasn't aware of. I replaced it with a new flasher and the turn signals are working properly now. But the hazards only work if you have the turn signal on as well. I also found a flasher 552 in this plug (photo below), it states in the...

Hello all, I have a 75 duster that I took my dash apart and installed aftermarket gauges. I never seen the lights work or even tried them when I bought the car. Long story short after doing engine swap, paint and interior, when I tried the turn signals nothing but the flashers would go on if I...

Thank You!

I have a 75 Duster and found a part that I don't know what it is or where it goes.

Sounds good! Do you take Venmo? Paypal? PM me please and we can arrange it. Thanks!!

I am looking for a headlight bucket for the driver's side that will fit a 75 Duster. It's the piece that goes right behind the headlight that's held in by a spring and 2 adjustable screws. If you have one, can you give me a price on the item with shipping to Walnutport, PA 18088? Much...

Hello gents, I have a 75 duster with a 2" lift. My back space 4 1/2 with 2" clearance to be safe and overall height should be no higher than 26". I want to put 15" x 10" rims on the back. What size tires do you recommend? The front is stock height I would also like 15" x 8" on the front...

Problem solved! So I bought a brake booster push rod adjustment tool to make sure the push rod is where it should be. I bench bled the MC again and still have the same problem. I bought a new MC from the auto parts store and problem solved! Thanks for the help and advice!

Yes I did. And after it wouldn't flow, I took it off and bench bled it again.