spd691's latest activity
-
spd691 replied to the thread CAM HELP NEEDED!.I wasn't getting a warm and fuzee feeling when I called and spoke with Tom so I canned the Hughes idea and went with Howards. Nobody had... -
.100 piston to head? :poke: Valve clearances are in that spec. The issue I had described above was because I slide the crank timing...
-
spd691 replied to the thread CAM HELP NEEDED!.The engine did have a solid cam in it when I bought it. I like the idea of a quiet maintenance free cam, if I can have it. The cam That...
-
-
spd691 replied to the thread CAM HELP NEEDED!.Roller wasnt in the budget. But, yea.
-
spd691 replied to the thread CAM HELP NEEDED!.Yea, I'm not sure. I guess ill wait and see what Howards says.
-
spd691 replied to the thread CAM HELP NEEDED!.I submitted my build and car info to Howards. Ill wait and see what they recommend. I just hope they have something in stock.
-
spd691 replied to the thread CAM HELP NEEDED!.Ill be checking it, I just need to find the cam. I think I settled on one from Howards, less lift and little closer to my realistic...
-
spd691 replied to the thread CAM HELP NEEDED!.I will be checking VTP clearance, if necessary I will modify the intake pockets. General rule is .100 should be safe on the intake. From...
-
spd691 replied to the thread CAM HELP NEEDED!.I am running stock length H beams, forged stock crank, pistons machined down to achieve zero deck. I can use my head gasket of choice to...
-
This has me wondering as well. The cam companies do things I don’t always understand and wonder why they supply what is ether a lot of...
-
spd691 replied to the thread CAM HELP NEEDED!.I was on the Howards site and found this, 710991-08 710991-08 Year: 1964 - 2003 Make: Chrysler Engine: 273, 340, 360 Camshaft Type...
-
spd691 replied to the thread CAM HELP NEEDED!.TBH, I was thinking this cam is a bit much for what I'm doing. I think I need to tone it down a bit. The real questions are where? Lift...
-
yeah, especially with that narrow of an LSA upthread rumblefish mentioned Howard's as a possible source and i'll second that. they seem...
-
Going from 108 to 110 might lose you 5-10+ lbs-ft, it all steps in performance the further you stray the further the change in tq and...
-
spd691 replied to the thread CAM HELP NEEDED!.I have been looking. With the 108 LSA and the duration @50 with this lift combo it's a it of an odd duck.
