SpeedThrills's latest activity
-
SpeedThrills replied to the thread "Liquid Sandpaper".I’m going for the best quality I can afford. I know it won’t be cheap. I won’t be doing any priming or blocking myself. -
SpeedThrills replied to the thread "Liquid Sandpaper".Thanks for that. I always hope what I post helps others down the road. God knows, I get plenty of help here on FABO. :)
-
This has been an excellent and informative thread. Thanks to everyone who posted. I usually use small pieces of adhesive back dry...
-
Degreasing is also a big part of it! Wax and grease remover or similar cleaner.
-
SpeedThrills replied to the thread "Liquid Sandpaper".Yes, it's clean. Just have to be sure the final wax and grease remover application is with a product approved by the painter. Of...
-
SpeedThrills replied to the thread "Liquid Sandpaper".I’ll keep all of this info in mind. Thanks. And maybe, if whomever the painter is, is busy, I’ll have plenty of time to prep it. (if...
-
There was a product called Jam-it years back. I used it . It didn't work. Over some time the jams peeled anyway. Nothing works better...
-
Nothing likes to stick to metal. Tooth and immediate application of a direct to metal product is what you want. Bulldog is not that...
-
Ya always sand but sometimes it difficult to get everywhere. Another product is Flash Bond XIM. Been around forever. Might have some...
-
I would just sand it...180 grit for primer and 400-600 grit for paint. The SEM TDS says its an adhesion promoter for plastics.
-
Most of the body shops around here us a product called Bulldog. Expensive and super stinky. Use it for things like chrome or glass or...
-
I use Bulldog. Works well if ya have plastics or need to blend. Dying plastics or vinyl tops too. Not cheap but Works. My wife had some...
-
SpeedThrills replied to the thread "Liquid Sandpaper".Whoops, I linked the wrong product. I meant to link to one for metal. Bulldog, okay. I probably will sand, though. But I keep...
-
Back in the 80's, there was a product called, "Sand Free". It was a rattle can and it's intended use was for things that are hard to...
-
SpeedThrills reacted to Super-Cuda's post in the thread Engine misfire or loading up when opening the 4 barrel. with .Fuel pressure problem?? You mentioned the car sat for a while. Deteriorated fuel inlet sock or pieces of it partially clogging up the...