SpeedThrills's latest activity
-
SpeedThrills replied to the thread MIA.That’s probably not his actual username, because it didn’t come out in red. -
SpeedThrills replied to the thread RPM drop and electric fans!.My 360 has a lot of initial because it has the MP 292-508 cam. It didn't like starting hot, so I put an ignition kill switch in it. I...
-
SpeedThrills reacted to Icetech's post in the thread For those curious. My bill for my short block. with .eck.. yeah.. i woulda charged you extra :) I own a service business and you can believe some people get charged more for being...
-
Used it in a collision shop back in the day but it kinda faded out after 3M came up with the Scotch-brite. A scuff pad made it almost as...
-
SpeedThrills replied to the thread "Liquid Sandpaper".I’m going for the best quality I can afford. I know it won’t be cheap. I won’t be doing any priming or blocking myself.
-
SpeedThrills replied to the thread "Liquid Sandpaper".Thanks for that. I always hope what I post helps others down the road. God knows, I get plenty of help here on FABO. :)
-
This has been an excellent and informative thread. Thanks to everyone who posted. I usually use small pieces of adhesive back dry...
-
Degreasing is also a big part of it! Wax and grease remover or similar cleaner.
-
SpeedThrills replied to the thread "Liquid Sandpaper".Yes, it's clean. Just have to be sure the final wax and grease remover application is with a product approved by the painter. Of...
-
SpeedThrills replied to the thread "Liquid Sandpaper".I’ll keep all of this info in mind. Thanks. And maybe, if whomever the painter is, is busy, I’ll have plenty of time to prep it. (if...
-
There was a product called Jam-it years back. I used it . It didn't work. Over some time the jams peeled anyway. Nothing works better...
-
Nothing likes to stick to metal. Tooth and immediate application of a direct to metal product is what you want. Bulldog is not that...
-
Ya always sand but sometimes it difficult to get everywhere. Another product is Flash Bond XIM. Been around forever. Might have some...
-
I would just sand it...180 grit for primer and 400-600 grit for paint. The SEM TDS says its an adhesion promoter for plastics.
-
Most of the body shops around here us a product called Bulldog. Expensive and super stinky. Use it for things like chrome or glass or...