SpriceyStuff's latest activity
-
SpriceyStuff replied to the thread Slant Six Carb Issues.I can’t afford to just Willy Billy start buying new pumps and hope to god that it works the way it’s supposed to. They don’t even put... -
SpriceyStuff replied to the thread Slant Six Carb Issues.Welp I hooked up my pressure gauge and I’m pushing 8lbs just from the starter. Not even running. So sounds like it’s regulator time.
-
SpriceyStuff replied to the thread Slant Six Carb Issues.That’s an interesting anecdote. I have an electric pump already so maybe I’ll just shell out and buy a pressure regulator and not worry...
-
SpriceyStuff replied to the thread Slant Six Carb Issues.Wrong. Tried to drive it to get some oil for the daily and it did it again. The floats are definitely boned. Ordered a NOS set on eBay.
-
SpriceyStuff replied to the thread Slant Six Carb Issues.Thanks for this. I may actually do that at some point. It turned out that there was a brass piece inside that had fallen out of its slot...
-
Hey guys. I’ve been having some carb issues lately and I’d like to see what you guys make of it. I got a Slant six with a Holley 1945...
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….We decided to install the new pump with a mechanical gauge. Ran the hose through the hole in the firewall where the A/C drain hose would...
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….I’m assuming that the “reading” I’m getting is just BS voltage fluctuations from being grounded to the block or just hanging loose or...
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….Funny story… it turns out that I don’t have an oil pressure sending unit. At all. The wire that goes to it is cut and was dangling down...
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….My dad actually floated that idea out there. I’ll have to check into it
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….Yeah. That’s fair. I’ll see if I can’t get my hands on my brother’s gauge before I do the pan. It’s just so frustrating. I’ve never had...
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….Yeah Charlie pointed that out. I’ll probably drain some oil out tomorrow. My dad is gonna come help me out and I’m gonna drop the oil...
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….Worse comes to worst I’ll drain a little oil out tomorrow. It’ll be fine. I think my dad and I are gonna put a new oil pump on it tomorrow.
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….Idk man. It’s bigger than all the other ones that are “stock” according to all the parts stores.
-
SpriceyStuff replied to the thread Slant 6 oil pressure woes….My brother has a manual gauge and I’m gonna try and pick it up from him tomorrow and check it. I’m also gonna be tracing wires to see if...
