Recent content by Staffords

I'm looking to redo the exhaust on my 68 Barracuda. Current welds look like birdshit and I'm not in love with the tinny sound of the current mufflers. It's a 440 with TTI Shorty Headers. I'd like to run an X-pipe. Both TTI and Pypes make a 2.5" exhaust kit w/X-pipe for A-bodies. I've read many...

The old Cooper Cobras that were on my car when I bought it had turned a little brown. The tires were almost 10 years old but still in great shape and soft, didn't appear to have been driven much. I didn't attempt to get them white. Replaced with BFGs. For as much work as guys are doing trying...

Price reduced. $300. I need these out of my garage!

Yessir I'm looking for the new, softer gasket. Anybody know the part number?

Mine looks like the current parts store replacement on the right.

I know, DrDiff sells one. If a new cap/gasket doesn't solve the issue I will probably replace the master cylinder, but a new cap/gasket is much cheaper/easier.

I have the apparently common leak around the edges of the cap from my 68 Barracuda master cylinder. The master cylinder is for disk front and drum rear, with the 2 different size reservoirs for front/rear. It weeps around the cap/gasket surface, enough for to cause the OEM style cast master...

SET OF 4 MOPAR RALLYE WHEELS FOR SALE These wheels/tires were on my car when purchased. Tires in good shape, no cracks. Includes trim rings and center caps. FRONT: 14x6 with 5x4 bolt pattern, wrapped in 235/60R14 Cooper Cobra Radial GTs (trim rings have a few scuffs/dings see photos) REAR...

Set of mopar HD springs removed from a recently purchased 68 Barracuda Fastback. Springs hold arch (see photos of springs on vehicle). Don't know the history/miles/age. $100 picked up in Madera, CA 93636. Will not ship.

Inside of the wheels stamped "Made in USA CT&W 2017"

2015 for the fronts and 2019 for the rear

SET OF 4 MOPAR RALLYE WHEELS FOR SALE These wheels/tires were on my car when purchased. Tires in good shape, no cracks. Includes trim rings and center caps. FRONT: 14x6 with 5x4 bolt pattern, wrapped in 235/60R14 Cooper Cobra Radial GTs (trim rings have a few scuffs/dings see photos) REAR...

The stance on that '70 Cuda looks killer! I did look at the QA1 shocks and I've heard they're a high quality product but they don't appear to offer different lengths... QA1 shocks are all 23.6" extended, I was looking for something around 25" based on 2-2.5" longer than stock. Its only about...

So it turns out the rear shock studs (both upper and lower) on my car are 11/16" or 0.688" not 5/8. I don't know what they should be from the factory, but that's what I've got. It appears 11/16" is sort of an oddball size. Skyjacker and Energy suspension both claim to sell 11/16 ID polyurethane...

Supposedly better thread engagement. The regular conical nuts went on without issue, but also haven't put any miles on the car. I switched because I didn't know there were special lug nuts to for this setup. If they make them, might as well use them. It takes 20min to switch the lug nuts. The...