Recent content by sv650

Yeah there is a baffle running the entire length of the valve cover. I will work on preforming a leak down test and get back to you. When you pull the air filter off and look down through the tb you can see all the oil pooled up in the intake.( not the stock intake that has the gasket...

Hey guys my bro has a 96 ram that I built a 408 for and it seems to suck about a quart of oil every-every other gas fill up through the pcv valve. We have already replaced it twice. Using a valve cover breather/filter on the driver side. A quick swipe with a q tip on the inside of the pcv hose...

Hey guys i am selling my 67 barracuda. I have too many projects and this one needs to go. the car has solid floors and frame rails, except for one spot near the passenger torsion bar anchor about the size of a quarter. I tried to get a pic but it didn't turn out. I have two new quarter panels...

does anyone know if you have to use behive spings with stock magnum rockers or can you use standard sprngs.

Hey guys I am building a 408 for my 96 ram. I am using a 5.9 magnum block and intake. I bought a set of engine quest heads. My cam is a comp cam custom grind .512 lift int. and exh. (with the 1.6 rockers (stock)) Comp says that they want to use a behive spring with that cam and have 125lbs...

Hey guys I am in the process of building a 408(406act.) for my 96 ram. I bought an indy stroker kit. They claim that all of the parts are from mopar. I need to know if the pistons are hypertectic or not so I can set the ring gap. I would like to keep working on the motor this weekend. There is a...

Hey guys I am in the process of building a 408(406act.) for my 96 ram. I bought an indy stroker kit. They claim that all of the parts are from mopar. I need to know if the pistons are hypertectic or not so I can set the ring gap. I would like to keep working on the motor this weekend. There...

i have a 72 block, crank, tray, pan, rods, balancer, heads, intake, and air cleaner, the block is standard bore with minimal wear and the crank is also in good condition. i am located in southwest michigan, my email is nubby360@yahoo if you are interested.

i have a 72 340 block, crank, tray, pan, rods, balancer, heads, intake, and air cleaner. the block is still standard bore with minimal wear. i am located in southwest michigan. my email is nubby360@yahoo if your interested.