Recent content by TheContractorDude

Greetings Is the set screw for the shift knob 3/32? The allen set screw on my shifter is stripped and I will probably need an easy out to extract it. Great

Cool I love old school! I ordered a bunch of stuff from R/T Specialties, we'll figure it out!

1 owner (parents bought/handed down) 1967 383 S dash 120 MPH w/ tach

Here is a picture for reference of the hardware for the top trunk trim piece

Do you have a link for the fasteners?

So this is a top piece with the notch?

Now that makes perfect sense!

Cool thanks Ya the upper trim outer holes on my trunk lid are not accessible. So I was thinking there was a push in type of fastener. I got a call into Tom at R/T Specialties as well

Greetings, I am in the process of installing the two thin pieces of trunk trim on the Barracuda. I am missing 9 of the clips w/nuts and I believe the top piece at the ends had some sort of push in style attachment cause there is no access to those holes in the truck lid for installing nuts. Does...

Found Ty

This a picture of the bracket I am looking for

Ok so here are pictures of the left hand poly mount for a factory A-Body BB car. I have a factory BB car with a Schumacher left hand mount that is not compatible with the poly mount. I think I wound require the factory LH motor mount bracket. I have pictures of the mounting bracket. Know I need...

Greetings, Would someone be kind enough to post a picture of the bisket side of this mount. I have a Schumacher factory replacement mount but it only has one hole for the mount. I bought a poly mount and it has two mounting studs and I would like see if I can drill this Schumacher mount to...

Thank you

Oh thanks I was not aware they were different. 383