Recent content by TheGrimSpeed

Thanks for clarifying this Mike!

So, would there be two boots on a 66 dodge dart 4 speed console? On on the hump itself and on on the console as well?

Looking for photos on early abody 4 speed console car if you have any! Trying to see if there’s any differences in the later 67 and up from the 66 factory consoles Thanks

It’s a 1998 5.9

Looking for a good magnum pcv valve that isn’t noisy it starts to rattle at high rpm’s. I’m running the stock magnum valve covers thanks!

Hey! That a good thought! But the problem was solved it was my ignition system

Problem has been fixed! Installed the MSD unit and boom! She rips pulls to 6000-6500 no misfire at all! Thanks everyone for everything! I got the unit for $110 bucks on eBay thru Holley refurbished units, they have them on there for $134 obo!

Do you use a stock style cap and rotor just upgrade cables? And open plug gap to .045?

The machine shop that I go to installed them, that’s a unknown variable as well. I checked the firing order, yesterday when I rearranged my wires in the engine bay. The module is the 4 pin style a rock auto special. So the 901 springs were for a 318 build I did with adjustable 273 rockers and...

Well that’s interesting. You should have enough spring. My thoughts immediately go to your Chrysler ignition module. I was thinking the same, I’m trying to find a good upgrade but it seems like they’re all Chinese junk. Holley sells reman MSD boxes I just bought one for $115 shipped. That would...

What a relief

Guys I guess I was wrong I was looking through my emails and found that yes I indeed buy the Hughes updated spring kit in full, with springs keepers and retainers. I guess my issue is either with fuel or spark!

Yes have and you commented it looked like it was on the hot side.

I believe members were saying because of metal expanding due to heat?

installed a 80 jet in the rear! And same deal after it was warmed up she started backfiring @5200-5500 when she was cold there was no issue. Although that 80 jet made the engine happier. So what I have left to do, I ordered a cap and rotor and new plugs and wires. Car needed all that...