Recent content by Tim Nelms

I found these bushings at company called MEGA PARTS. I have installed them and they do fit and take up the looseness in the shifter.

Thank you. Passion is supposed to check if they have on stashed in their warehouse and let me know. At least I have a good option if they do not have one. You are correct the 67-69 Zbars are available in many places.

Thank you. Passion Performance may be out of stock also. How much did you have to remove from the 67 Zbar and which end did you cut? I already have the adapter from Brewers.

Thank you it looks like the one from Passion Performance may work.

I have a 1969 10 1/2 bellhousing in my 1966 Barracuda. I need the proper Z bar and Brewers will not have any for at least a couple of months. Is there another supplier or a Z bar that can be reasonably modified to work?

Thank You so very much. I believe between the measurements and pictures I can have the missing pieces can be fabricated. Im still hopeful that someone has a decent patch because I lack good fabrication skills with compound curves.

I would appreciate pictures and measurements. If nothing else I will have references for a fabricator to make a patch.

Unfortunately there are few places with older cars in my area and none have a 66 Barracuda.

I need the front portion of the right front fender and fender trim. you can see the portion that a prior owner trimmed off. I will take a complete fender.

I need a right front fender with trim. If one is damaged I can use a patch panel on the front section above the body line. I also would be interested in a set of tail lights and the improbable trunk support.

Congratulations. I bought a MAXJAX a few years ago. Although it only goes up about 4 feet I found it to be a game changer. I am forced to sit under the car but I haven't found anything I cannot do.

What will take both of them?

I just wish I could find a pair.

I need both left and right headlight rings for a Barracuda however I can use Valiant rings but they don't fit as well. I'm also looking assorted parts including the vent box doors (I will buy the whole part if needed) and at least one trunk hinge trim piece.