Recent content by Trucker cj

Ok I got her running but I mash the gas pedal and it dont have any rpms on the top end...its really boggy..its the same thing it was doing before

Ok thank you

Do I cut the blue wire with white stripe and run it to the ballast resistor or do I just splice into it..that wire connects to another plug and runs under the truck and goes to the back

Dont know how to PM

Theres 2 brown wires and a light brown wire...

Ok cool thanks

I dont care I just need it running

Yes...thank you ..I know how all that stuff works I just dont know what wire is what

Thank you...I'm not real good with wiring...what do the wires connect to on the firewall

I have a 1984 slant 6 and the lean burn system finally gave out, I bought a brand new points destributor for 20 bucks and not sure how to wire it up correctly...I got to make this thing run, please help I need to wire this points ignition until I can afford an electronic system

Well..there is a little piece of pipe coming from the catalytic converter and connecting to the smog pump with some sort of check valve and rubber line, that valve burnt out and melted the rubber line and part of the smog pump...so I chopped the rubber end off and put a kink in the pipe sticking...

Yup just got done checking all the plugs everything there is good..i might have found the problem in a cracked vacuum line...took it for a spin and it seems to be ok now...i will find out for sure on my way to work tomarrow...i appreciate all the ideas

No I didn't check the spark plugs I did those about a month ago and it was running fine up until 2 days ago

Yeah. I checked a bunch of them hoses yesterday and couldn't really find much wrong it wouldn't be so bad if it wasn't losing power when I was driving it