TT5.9mag's latest activity
-
Hi everyone. First time caller, long time listener. I've been working on this car as time and money permit. I got it from a friend as... -
TT5.9mag replied to the thread 1987 318 LA.You are asking questions that point to you not necessarily understanding how these parts interact with each other. Thats ok, learning is...
-
If I had a block with provisions for a factory roller cam, I would never step back to a flat tappet setup.
-
i agree with @TT5.9mag on a good piston and zero decking the block. get some compression back in there. the 302 heads will help in this...
-
Yes and no. Yes if the spring fits your needs. No if you are doing it for clearance. I don’t use them for anything with rpm over 7k...
-
TT5.9mag replied to the thread 1987 318 LA.The single best thing you can do to a 318 is put a good piston in it, and have the machine shop deck em to zero. That puts you above...
-
TT5.9mag replied to the thread Stepped in it now!.I don’t know what carts they use but here’s a few pics of the big block from my boat on the dyno. We had to make the turbo dumps to fit...
-
-
TT5.9mag replied to the thread Stepped in it now!.I was having dinner with Troy from westech tonight when I read that. He said they use Schoenfeld sprint car headers on just about...
-
That was the issue I had. I wanted to net at a minimum .825 lift. That was impossible because to keep the duration even reasonable for...
-
TT5.9mag replied to the thread Stepped in it now!.Congratulations. I think it’s a benefit to any engine builder / machinist to have one. If you have any setup, installation, or software...
-
Welp, I have really went off the deep end now, bought a old superflow 901 dyno setup, plan is to update with newer control and data...
-
TT5.9mag replied to the thread What's the going price for....Fixed it.
-
TT5.9mag replied to the thread What's the going price for....Well said. I’ll hold on my assessment that no one has done it, ever with that intake. At least on purpose. Ive done the same thing on...
-
TT5.9mag replied to the thread What's the going price for....I knew you’d been up in that area on W stuff. Would you tend to agree that no engine ever with a w2 strip dominator has ever even been...
-
Hey no worries at all. Almost every time things go off the rails like this, I learn a ton. lol. Thanks for the offer as well.
