TT5.9mag's latest activity
-
TT5.9mag replied to the thread 1966 Dodge Dart ‘freebie’ Project.Perfect. Reach out if you need help -
TT5.9mag replied to the thread Project Cheap & Nasty Updated With Back Story.I run the MSD 6BTM on my boat. Works fantastic. But I’d recommend the digital programmable box MSD 6AL-2. It’s more compact, has WAY...
-
TT5.9mag replied to the thread Project Cheap & Nasty Updated With Back Story.A 44 is probably too big for ~300hp slant but it leaves room to grow and there is no downside really. You can have less than perfect...
-
I do, but maybe for a different reason. I wave so I know they saw me and don't run my *** over. I live in small town USA, so we wave...
-
I make sure to thank everyone that extends a courtesy to me. I never want to be a burden to others nor do I want them to regret doing me...
-
TT5.9mag replied to the thread Brainstormin' 440 vs 5.9 ....In my opinion it’s worth less than that. :lol: But all of my experience is with small blocks. I have not used a big block version.
-
My thought with the torker was when I build the 440, it will be the right intake. I wish I had an RPM, I would swap it at the strip and...
-
TT5.9mag replied to the thread Brainstormin' 440 vs 5.9 ....Maybe someone on fabo has one they can loan for a test. If I had one I certainly would. Anyone have an intake they’d like to loan and...
-
TT5.9mag replied to the thread Brainstormin' 440 vs 5.9 ....After it’s in the truck and run a few passes, can I please request the first modification to be an rpm air gap intake in place of the...
-
TT5.9mag replied to the thread Brainstormin' 440 vs 5.9 ....I wholeheartedly agree with that entire assessment. And I’d like to add, an engine with a higher specific output will respond more than...
-
Motorhome 440, lightly cleaned up 452s, Torker intake, headers in a long bed dodge truck. Gear ratio to be determined after some...
-
TRYING..... to keep this on every page….. falls to about every other page... LOL TT5.9mag --------- 16.90 jrc4y4 ------------- 15.30...
-
What I see on the dyno is most motors will gain some with headers over manifolds. The motors that have a camshaft with more overlap will...
-
TT5.9mag replied to the thread Brainstormin' 440 vs 5.9 ....The numbers were used just to prove the point. And in your example the same holds true. Ultimately the theory is the same and so is my...
-
TT5.9mag replied to the thread Brainstormin' 440 vs 5.9 ....And I’m not saying you won’t see gains from headers. I’m saying the tube size won’t make much difference on a relatively stock 440. I...