Recent content by Wire

He said, Now the engine cranks, but I lost spark. So it must be grounded, if he is able to crank it over.

I would install your old neutral safety switch to see if it starts. If it does, the new switch is your problem. If not, you will have to do some more investigation to see what your problem is.

Direct Connection Performance Book 1980. I used to have 3 of them, this is the last one I have. Very good condition. $100 US. Ships from Ontario, Canada. K8N 0N1

I believe this jacket is from the eighties and I think it is a reproduction, not sure. I bought in 1990 for my collection. Large size. It's in great condition. $75 US. Ships from Ontario, Canada. K8N 0N1. I've never worn it. I used to place it in my 1970 Road Runner when I went to car shows

Steve, PM me with your information and I will mail it to you.

Al, I put a set of PG front bucket seat covers on the 70 4 speed Purple Swinger Dart I sold in the summer. Had no problems with the installation and fit was nice. Not as good as Legendary for quality, but for the price, they worked great.

I have a friend that has a 1901 Street Demon Carb 625 CFM on a 340 motor. I have a dynode 340 motor making 375 horsepower with a 1805 Edelbrock Thunder Series 650CFM. He built his 340 motor with the same parts I used except he used a 1901 Street Demon 625 CFM carb, and when he had his motor...

you are correct. I just had some left over 1 gauge wire, why not use it.

This is what I did, 1 gauge wire to a cut off switch, from the switch I then ran the wire on the inside across the back seat and then up the drives side (same as the factory did) out the firewall through floor plug to the starter. Next 1 gauge wire from the starter terminal up to the starter...

Pertronix work great!! easy to install, run a direct 12 volt wire and that's it. I run a Igniter III with rev control and a Flamethrower coil on my 340 motor. I believe you will need model 1361A for your slant 6. Good luck.

nice looking jackets, way cool!!!! Wish they were mine!

this is my friends 1970 Duster

Thanks Toolmanmike. yes it is option S83. I have only seen one on a car from Michigan a few years back at a car show. The box sticker said it was ordered in January 1971 from a Detroit Dodge dealer. I thought it was a cool looking steering wheel and I was looking for something different then...

Thanks for the information. I though it was an option you could order. It's going to look good!!

That's the type I want to buy (Rim blow) . It is black in color and will match my interior. I thought it had a adapter can, I was wrong. I talked to him tonight and he said it was one piece steering wheel. I'm traveling to his house Saturday to see it for the first time and hopefully it's coming...