Yellow Duster's latest activity
-
Yellow Duster replied to the thread Redressing a controversial subject....https://www.smart8coil.com/ All this muti-coil talk reminded me of the Ishmael 8 coil stuff. I remember seeing adds for it in tge 80's. -
Yellow Duster replied to the thread priming the oil pump.Glad it's working for you now!
-
Yellow Duster reacted to OldmanRick's post in the thread Mild 340 8 3/4 gear and possibly converter question with .That converter will act much better on the street with less gear. For what your doing with the car, i'm in the 3.91/4.10 range.
-
That'll probably pull your fillings out on the bottom end.
-
Yellow Duster replied to the thread priming the oil pump.That sucks to hear, but now you know. Are there any numbers stamped on either end of that cam?
-
Yellow Duster replied to the thread TF & Speedmaster Flow Tests.I have 60 and 10 cc syringes and a piece of plexiglass that is a little too thin.
-
Yellow Duster replied to the thread TF & Speedmaster Flow Tests.I measured the chambers when I got them, they were 66 to 67 cc's. The diff probably has more to do with my backyard methods that actual...
-
Yellow Duster replied to the thread TF & Speedmaster Flow Tests.I don't have a way to measure port volume, but they are advertised as 190 cc. I'll try to measure the throat size tomorrow (if I don't...
-
Yellow Duster replied to the thread TF & Speedmaster Flow Tests.I attached the flow data for mine. I had originally planned them for a mild cammed, 408 stroker truck engine, but that plan has changed...
-
-
Yellow Duster replied to the thread SpeedMaster Heads for a 5.9 Magnum.You cannot put the magnum rockers on the heads you linked. Magnum rockers are pedestal mount, those heads use shaft rockers. You can't...
-
Maybe some of the other guys can jump in here. I'm not going to pretend to be qualified to give advice. My concern would be the large...
-
Yellow Duster replied to the thread TF & Speedmaster Flow Tests.That's about what mine flowed. Have been thinking about putting them on a 360 with about 10.5 to 1 comp and a hyd roller cam, 234/238...
-
Yellow Duster replied to the thread TF & Speedmaster Flow Tests.What specific problems did you have with the CNC Speedmaster heads? I have a set I haven't used yet. They did get a going over and flow...
-
That’s a valid idea. Thanks for the input. We’ll see. Right now I’m taking time out to read Vizard’s books before my next step on the...
-
Yellow Duster replied to the thread Swap pistons for quench?.You said you were planning another engine for the future. Put this engine together as is with the pistons you have and stick in a...
