Yote's latest activity
-
Yote replied to the thread Die grinder and bits for porting- it's been a while.Just my observation, which you probably know. With what little I have done, using a lubricant makes using the tool smoother with less... -
Yote replied to the thread that was fast!!.I have NO proof, but I have read that after several years the coating can start to release and cause more problems. You may want to...
-
Yote replied to the thread Clutch pedal return ??.Was never aware of a second spring. In referencing the service manual the only spring shown near the second location seems to be on a...
-
As long as the throwout bearing is off the pp fingers, it's fine. My pedal has never come up all the way, doesn't mean a thing.
-
Yote replied to the thread Clutch pedal return ??.No place on Lakewood bell housing to hook spring that’s why I fashioned loop. Spring has a lot of tension on it. Yote
-
Man that's a heavy spring.. if that's not throwing it back then your push rod adjustment is totally out to lunch !
-
Yote replied to the thread Clutch pedal return ??.Thanks guys, Unless one of you with more knowledge than I stops by, it looks like playing with the adjustment is my go to trial and...
-
I had that with the replacement clutch on my 66 (that I no longer own). The clutch worked fine. Try adjusting the clutch so that it...
-
How about posting some pictures of the components as installed? Engine and trans mounts secured (nothing shifting/rolling)? Did you...
-
Yote replied to the thread Clutch pedal return ??.All mounts are secure. I added nothing not visible,not sure what previous owner did. Am good at nuts and bolts, not so much on technical.
-
-
Make sure that you have the spring that goes between the release fork and hooks onto the bellhousing. That could easily be your problem...
-
Pedal full up... grab the fork end and it should only have about 3/16 play until the throw out bearing hits the pressure plate fingers...
-
Yote replied to the thread Clutch pedal return ??.Over center spring is in. Spring on release arm is in and strong. Yote
-
If nothing is binding anywhere, I suggest you smoke back over the free travel adjustment. Having too much free travel will cause it.
-
Yote replied to the thread Clutch pedal return ??.Clutch rod not rubbing at firewall.
