I have been looking for motor mounts to put a 360 in my Dart,spool type.Thing is I was looking at Mancini and they show some for like $160.00 but Oreilly lists some for $10.00 apiece are Mancini's urethane mounts THAT much better?
motor mounts??
- Thread starter rusty
- Start date
-
Frankie
Member #9641
Yes! (IMHO)
...also depends on your personal budget.
...also depends on your personal budget.
damnimcooltom
Too Cool For School
I haven't seen either, but most of the rubber ones are made in China or India, and are really crappy quality.
I wonder what poly inserts from one of the aftermarket companies stuffed into the metal part of the O'Reilly mount would cost?
I wonder what poly inserts from one of the aftermarket companies stuffed into the metal part of the O'Reilly mount would cost?
I have a set that was made in India and the quality is less than, well you know.
Have you thought about these? If you can find or already have the mount itself.
http://chucker54.stores.yahoo.net/ensumomopoin.html
A lot less expensive at 32 bucks, as long as you have the spools. Even if you don't have the spools you could go buy a set at Napa for 10 bucks apiece and upgrade them with these inserts. You're still gonna come out at about 50 bucks.
Have you thought about these? If you can find or already have the mount itself.
http://chucker54.stores.yahoo.net/ensumomopoin.html
A lot less expensive at 32 bucks, as long as you have the spools. Even if you don't have the spools you could go buy a set at Napa for 10 bucks apiece and upgrade them with these inserts. You're still gonna come out at about 50 bucks.
damnimcooltom
Too Cool For School
Yes, Energy Suspension. That's one of the poly ones I couldn't think of the name this morning.
$30 at Summit, too. It looks like that's for the pair. So for $30 + $10 + $10, you could save some coin.
$30 at Summit, too. It looks like that's for the pair. So for $30 + $10 + $10, you could save some coin.
funwithfuel
Well-Known Member
The problem w oreilly's mounts is that their computer says its for a 360 but the are really for a 318. The spread is incorrect. Find a good set at a junkyard from a cordoba or anything w/ a spool mount 360 . If the bushings are bad put new ones in but you'll have solid factory mount brackets. Good luck.
-
