[SOLD] 47 1/2 inch driveshaft

I had this driveshaft made when I put the Dana 60 in my car and it still had the 318 / 904. I wanted 1350 u-joints on both ends, but apparently there wasn't a yoke for the 904 in that size, so it is large Mopar u-joints. It is 47 1/2" center to center on the u-joints. It was made with what they termed race tubing and is strong, straight and true. When I put the 408 / 200R4 in I had to have another made and this one has been gathering dust in my shed. If memory serves, I spent somewhere near $500 on this shaft and I know I have the receipt in my file. It has one season, about 1500 miles on it. I would like $125 plus shipping from North Branch, MN. Any questions or if you want more or different pics, let me know.

View attachment Driveshaft.jpg

View attachment driveshaft 1.jpg

View attachment Driveshaft u joint end.jpg

View attachment Driveshaft, u joint and yoke.jpg

PM sent