Cooter
Well-Known Member
Hey folks,
Trying to make room in the garage before spring. Located in 99336 Kennewick WA. Can ship the smaller stuff but I don't have the weights on any of this. I will trade/partial cash for an Abody disc brake setup BBP (including arms and spindles), thats really all I'd consider for trade.
Holley 750 4150 Vacuum secondaries. $400
I bought this new in 99, ran it on my Duster for 2 years then pulled the motor due to low compression on one cylinder.
It has quick-change jet bowls, blue re-useable gaskets...not paper, quick change vacuum secondary spring housing and Holley spring kit, manual choke.
Comes with Holley vacuum spring kit with several springs to choose from.
Holley jet kit $45.00
Comes with jets 64-99 in pairs (two each)
Also comes with Holley jet tool. #73's are not included, they are in the Holley carb above.
Mopar 360 motors
I have three mopar 360 small block engines:
1971 360 bored .030 over. Includes J heads, and edelbrock Torker single-plane 4 bbl aluminum intake $400.
1977 360 stock bore and heads. No intake. Pulled from Plymouth Volare. $250
1977 360 rebuilt, pulled from RV, built by machinist friend of the family. Aluminum 4 bbl intake, distributor, stock exhaust manifolds. $400
Holley 1920 Carburetor $25.00
Holley 1920 from a 225 slant six in great shape.
Vintage Mopar air cleaner $30.00
This was from an early slant six engine. Still has original labels and factory stickers on it. Sorry for the crap picture.
B&M Mopar small block flexplate $75.00
This was on my smallblock daily driver Duster before I pulled the motor.
Car was never raced or rodded. Has SFI certification
Cast aluminum Mopar small block valve covers $75.00
Includes breather and rubber grommets. Also includes reusable rubber gaskets.
Link to album:
http://imgur.com/a/3Y32B
Trying to make room in the garage before spring. Located in 99336 Kennewick WA. Can ship the smaller stuff but I don't have the weights on any of this. I will trade/partial cash for an Abody disc brake setup BBP (including arms and spindles), thats really all I'd consider for trade.
Holley 750 4150 Vacuum secondaries. $400
I bought this new in 99, ran it on my Duster for 2 years then pulled the motor due to low compression on one cylinder.
It has quick-change jet bowls, blue re-useable gaskets...not paper, quick change vacuum secondary spring housing and Holley spring kit, manual choke.
Comes with Holley vacuum spring kit with several springs to choose from.
Holley jet kit $45.00
Comes with jets 64-99 in pairs (two each)
Also comes with Holley jet tool. #73's are not included, they are in the Holley carb above.
Mopar 360 motors
I have three mopar 360 small block engines:
1971 360 bored .030 over. Includes J heads, and edelbrock Torker single-plane 4 bbl aluminum intake $400.
1977 360 stock bore and heads. No intake. Pulled from Plymouth Volare. $250
1977 360 rebuilt, pulled from RV, built by machinist friend of the family. Aluminum 4 bbl intake, distributor, stock exhaust manifolds. $400
Holley 1920 Carburetor $25.00
Holley 1920 from a 225 slant six in great shape.
Vintage Mopar air cleaner $30.00
This was from an early slant six engine. Still has original labels and factory stickers on it. Sorry for the crap picture.
B&M Mopar small block flexplate $75.00
This was on my smallblock daily driver Duster before I pulled the motor.
Car was never raced or rodded. Has SFI certification
Cast aluminum Mopar small block valve covers $75.00
Includes breather and rubber grommets. Also includes reusable rubber gaskets.
Link to album:
http://imgur.com/a/3Y32B
