Moser Engineering Rear Ends?

Moser Engineering Rear Ends?

I think everybody's got something good here. first off I got mine out of a Dodge three quarter ton. definitely you can get one out of Fords because you're going to cut the ends off of anything you get and just put the ends that fit your Mopar a body brakes. You got plenty of time to buy I think the best thing to do is look for the gear ratio you want by the one with that. 9 times Outta 10 these are in great condition as far as the gears go.

Walker434 said
Some fords had Dana's some 9 inch. 80s and 90s ford and dodge 3/4 ton vans are good just make sure they have the 3 inch axle tubes. Some of the later model stuff has 3.5 inch tubes. Mine came out of a 96 ram 2500. Basically any Dodge 3/4 ton pickup from 73 to late 90s should have a Dana 60 in the rear.

alexk90 said
Okay, so I do know that Danas came on Fords, and my if looked into right the f-250s? At this point, I havent pulled the trigger on anything yet and well if anything, i will just store the rear end in the garage for a future project or even this project. Cause parts around here are only going to get more expensive or not able to find.
So my real option in my area is hitting up the local u-pic-part yard. Which i have no problem with. I just want to know what i am looking for when i go in there. So any pointers on that?

451Cuda said
Just watch craigslist for a dana 60. Last one I bought was $40, from a '74 F250. Guy just wanted it out of his garage and had no luck trying to get $100.