[SOLD] A body Torsion Bars

-
Status
Not open for further replies.
Dartn440

Dartn440

Well-Known Member
Joined
Jun 2, 2013
Messages
3,529
Reaction score
982
Location
Southern Pines, NC
Rating - 100%
54   0   0
Contact seller
Set of nice A body torsion bars. Part numbers came back as 70s 890. I believe slant/318 application. Blasted, rust inhibitor. Clean and straight. $100 plus ship obo from 28387

0B0B7399-8340-474D-9CDE-91388984DDC5.jpeg


60A5135B-E04E-426F-AF69-0D4157CD91F6.jpeg
 
Last shipping I got was around $26 to VA. PM me if your serious and I’ll help you out. Even with shipping you are saving a ton over new.
 
This is what I was using as a reference:

.850″ 110 lb/in 2535890 / 2535891 slant six w/air conditioning, 318 w/o air
 
Dartn440 said:
This is what I was using as a reference:

.850″ 110 lb/in 2535890 / 2535891 slant six w/air conditioning, 318 w/o air
Click to expand...
Idk about that but I have had 5 a bodies barracudas 2 were /6 and the others were v8 and i checked the bars and they were different sizes
 
65 CUDA said:
Idk about that but I have had 5 a bodies barracudas 2 were /6 and the others were v8 and i checked the bars and they were different sizes
Click to expand...
If I'm not mistaken /6 non AC cars used smaller bars than the AC cars did. The /6 AC cars used the same bars as 318 cars with std dty suspension so technically the OP is correct that these could also be /6 bars
 
Sure...why not, it’s saturday. They are literally in my garage next to the machete and my Sig as a third means of protection.....$75 plus ship.....any lower than that and I will buy a car to put them under..
 
Status
Not open for further replies.
-

Back
Top