1962 dodge lancer upper control arm question.

-

Doitover

New Member
Joined
Jun 19, 2018
Messages
3
Reaction score
1
Location
Madras
So i picked up this lancer a few days ago. this is my first early A body. the guy i bought this from doesn't seem to know much about it other then it had a new k member in it and new lower control arms. i researched the k member, and it looks identical to the 63-66 s6/v8 k member. but when i was looking at the upper control arms. they were purchased from a scrap yard or swap meet, they had writing on them that said 1973-76 a body. is the suspension interchangeable between the years of abodies?

the steering box, steering column, sway bars, torsion bars, basically everything for the steering is from a 65 signet, there all used parts as well sitting in boxes in the back of the car. Im hoping you guys can tell me what i need, or what parts interchanges with this front suspension. id like to be able to order parts, but i don't want to go ordering the wrong parts. thank you folks for your time
 
Well, 73-76 Upper control arms are what's known as "big ball joint" upper control arms.
Need more information from you if the spindles, and brakes have been changed over in the earlier lifetime of that car.
73-76 upper control arms fiscally fit in the car but the stud diameter taper, of the ball joint, will not go into a 62-72 disc, or drum brake spindle.
 
-
Back
Top