Just about ready to finish the 9" install.
Got a few questions.
Pinion angle. This is a street strip car running 4.88 rear, drag radials and 02 03 SS springs. More street than strip tho.
Should I go full 6/7 degrees negative or should I tame it down to more like -5?
With my spring sliders, should I set them centered in the travel or a little more to the rear? Some folks say center some say more to the rear... what do you think and why?
Now the fun stuff, pics!
35 spline axles from strange.
View attachment 1715249132
Heres the rear mocked up, OH Yeah! When the car went up on the lift it was 4 wheel drum with SPB, she rolling out BBP and 4 wheel disk. Once I get the pinion angle set, i will weld the perches and rebuild the back brace.
View attachment 1715249133
Notched the frame, boxed it in and moved the front hangars. I cant remember the member who I stole this idea from but hes in Hawaii and was very helpful. You know who you are and thank you!
View attachment 1715249134
View attachment 1715249135
View attachment 1715249136
Thanks for all the help, I'm getting super excited to pull her out of the shop and lay some rubber down!
