Dragnut Well-Known Member Joined Apr 28, 2016 Messages 361 Reaction score 188 Location Pottstown Pa. Apr 20, 2019 #1 does anyone make a adapter to connect the Wilwood master cylinder to the 66 Dart pedal?
SGBARRACUDA ROY Legendary Member Joined Dec 7, 2006 Messages 22,009 Reaction score 10,663 Location PLANT CITY FL. Apr 20, 2019 #2 Rod comes out of the original. It has a rubber o ring that is holding it in. The Wilwood rod should be removable. Can't tell how by the picture.
Rod comes out of the original. It has a rubber o ring that is holding it in. The Wilwood rod should be removable. Can't tell how by the picture.
Dragnut Well-Known Member Joined Apr 28, 2016 Messages 361 Reaction score 188 Location Pottstown Pa. Apr 20, 2019 #3 So just use the original rod?
SGBARRACUDA ROY Legendary Member Joined Dec 7, 2006 Messages 22,009 Reaction score 10,663 Location PLANT CITY FL. Apr 20, 2019 #4 Check the depth of both holes when you get the rods out. If they are the same and the new one will hold the old rod in with a o-ring you can.
Check the depth of both holes when you get the rods out. If they are the same and the new one will hold the old rod in with a o-ring you can.