[WANTED] Exhaust Bracket/Hanger 1970 Swinger 340 Dart

-
Status
Not open for further replies.
J

James Streepy

Member
Joined
Mar 17, 2017
Messages
6
Reaction score
5
Location
WIndber, PA
Rating - 0%
0   0   0
Contact seller
I'm looking for an original exhaust bracket for the passenger side of a 1970 Swinger 340. These brackets were bolted in (3-bolts to the floorboard), would like the screw all well if available but not mandatory. Please send photos and include your asking price plus shipping to 15963.

Thank you.
 
All my 1970 Dart Swinger 340 cars had the plate spot welded from inside, behind the back seat. I cut up 26 Dart Swinger 340 cars 1976-1995 and all were the same
I have one good used one
Will get photos after work
In Hartford CT
 
Mine are made in the USA with USA Steel also have correct factory hardware.

5443A014-0DB7-4C0F-B2C9-04D7989AEA1A.jpeg


77F7B14D-5999-4A6A-B242-365131E76C15.jpeg
 
j061093409 said:
All my 1970 Dart Swinger 340 cars had the plate spot welded from inside, behind the back seat. I cut up 26 Dart Swinger 340 cars 1976-1995 and all were the same
I have one good used one
Will get photos after work
In Hartford CT
Click to expand...

Nothing is welded on. There is a hole on the inside part with the studs. This is held on by a screw so it doesn't take two people to install it on the assembly line. If yours were welded All 26 cars were clones or welded after the car was built. The brackets above that Davescuda is selling look perfect to me and they do not have the usual rust. If I didn't have any I would buy from him. Because of the angle on the bends they are very hard to copy. Nice job Dave.
 
Status
Not open for further replies.
-

Back
Top