8.8 swap questions

67/6barracuda said
Be mindful of the locator pin size and the height of the perches. I bought the mopar ones and cut them off cause the locator hole was to big, the Moroso’s are perfect. I have a build thread here. 67 Fastback getting 8.8 rear

View attachment 1715350404 View attachment 1715350407

The stock 3/8 oil pump pickup is the correct size to make adapters for the center hole. Cut a couple of pieces about 1/2 inch long, tap them in the center hole and weld them on the back side. You can also use nuts. Weld them into the hole then drill them to size.