Duster Mini Tubbed, how did you handle the trunk hinges?

-
Joe Mc

Joe Mc

No Car Like A MoPar!
Joined
Aug 13, 2008
Messages
864
Reaction score
291
Location
Lords Valley, PA
Subject pretty much says it all. Looking at the inner tubs there's a notch so the hinges don't contact the tub when trunk lid is closed. Knowing the top of the hinges slide in to and bolt to the trunk lid if you move the hinge braces to the center then the hinges won't line back up with the trunk lid... If you "tubbed" how do you handle this?

Sorry if stupid question and I'm no where near ready to tub yet but was looking at everything before doing anything and when I considered this (above) it made me say "hmmm???",

Thanks
 
Guess I should have moved the one trunk hinge before I asked... Looks like it would be close but slight notches and should clear. Thanks Biff:thumbsup:
 
Joe Mc said:
Guess I should have moved the one trunk hinge before I asked... Looks like it would be close but slight notches and should clear. Thanks Biff:thumbsup:
Click to expand...
It’s almost like they were thinking a head ?
 
Dart Sport with US Cartool minitub kit.I had to tap it in a little on the top corner to clear hinges in stock location.

IMG_2585.JPG
 
Ok last try. Probably send the whole link. Check page two or three if it works
s1355.photobucket.com
 
You must log in or register to reply here.
-

Back
Top