I have 2 65 833’s one that came with a V8 bellhousing, the other with a slant bellhousing. Both bellhousing come with the upper and lower splash shields. Both transmissions come with all shifter rods and special 65 speedo cables, one is used and the other appears to be NOS. There are 2 Hurst shifters, one used and the other rebuilt - both include the mounting bolts. There is one 65 handle and includes the mounting bolts. There is both a stock V8 and slant flywheel 9.5 inches and includes the flywheel to crank bolts. I have the the Brewer’s 10 inch clutch conversion pressure plate which works well with either clutch. Included are the transmission to bellhousing bolts and bellhousing to block bolts. I have 1 set of 65 clutch pedals with new clutch/brake pads, 1 65 trans hump, a pair of carpet protectors, 1 shift pattern bezel that mounts to the hump, 1 NOS boot trim ring, 2 sets of Z Bars, a B &T conversion driveshaft to go from the B & T flange to and 8.75 rear end and a light blue 4 speed carpet set if desired. Where i have only one part - pedals, hump etc, first one to take a conversion package gets the whole deal. It will be all or nothing - no cherry picking! This is not a fire sale as I don’t need to sell any of this stuff but since i can’t get the clutch leg to operate correctly, I’m converting to the A500. Here are the terms - $2500 for a complete package and I will finance if needed at that price. Cash ($2000) is king on a complete package. If you want to finance I will require a $200 non refundable deposit by PayPal or money order within three days to hold the package. Should the complete package sell I will work with any members on the not complete package. I will not ship but will meet within 250 miles. I cannot get pictures from my phone to load - says they are too large. I shall try to downsize them while i lay in the hospital recovering from a nasty gall bladder surgery.
