Kevko m301ko
I just bought this pan recently. I Notched the k frame, still hit. Had to cut 3/4 or so of an inch off the corner. Here’s a link to the before I cut the pan.
https://www.forabodiesonly.com/mopar/threads/kevko-318-340-kick-out-oil-pan-needs-trimming-for-clearance.468231/#post-1973053598
here’s
a couple pics after cutting the pan it was still not welded at this point. This provided 1/2 inch clearance between the corner of the pan and the k-frame. This is on a 1970 duster 318 motor.
Print