[SOLD] Gear Vendor

-
Status
Not open for further replies.
rusanos0126

rusanos0126

Active Member
Joined
Jan 25, 2014
Messages
39
Reaction score
17
Location
florida
Rating - 0%
0   0   0
Contact seller
F2892822-7FCE-4EB3-8C63-DCDFCDCFCBAB.jpeg


Gear Vendor For 727 & 904 Transmission Turn your 3 speed into a 6 speed

Model GV-727
Part # 3DFS727A
188659 Automatic 3-Speed

BRAND NEW IN BOX PAID $3,000.00 + Shipping

NEVER Taken out of box.

ASKING $2,000.00 + Shipping
CALL FRANK 772-341-0190
 
Last edited:
Please give part number. Does price include shipping. If not what is cost to ship to Idaho. 83854
 
Gear vendor lists different part numbers for different tail shaft lengths. I have a 1967 GTX with original 727. Will this work?
 
green72 said:
Gear vendor lists different part numbers for different tail shaft lengths. I have a 1967 GTX with original 727. Will this work?
Click to expand...

This GV setup will bolt to any 727 with the long tailshaft. You do not need to change the tailshaft itself. You just need to remove the factory tailshaft housing and bolt the one from this kit on. I put this same kit in a D300 truck and used it for several years, then when I decided to sell the truck, I took it out and installed it into a 71 Challenger. I did have to do some pretty heavy duty beating on the trans tunnel to get it to fit, but it did fit with only that mod. It is still alive and well in Ohio, after I sold the car. The install is pretty easy, and the mechanical parts of the GV are tough as nails. I had another one in a class C motor home on a short tail 727, and the electronics failed on it, and also the electric solenoid. Overall though, one of the best mods I've ever done to a vehicle. Good luck with the sale.
 
Status
Not open for further replies.
-

Back
Top