List of Best Street Performance Camshafts for "340-360"

bobscuda67 said
I'm using a Lunati VooDoo 702 cam in a 340 based 372ci engine. 220-226 degrees at .050 and I have Magnum heads with the 1.6 ratio rocker arms for a little lift bump. Edelbrock Air Gap intake and a 650 Eddy carb stock exhaust manifolds.
The 904 trans has a TransGo kit in it and a low gear set with a 9 1/2" 2800 stall converter. A 3:55 rear gear and a Detroit locker diff.
The car idles like a stock 340 but is shockingly quick thru first and second gear.
I miss 69 440 Cuda! I loved his post, they were so entertaining.

Oh that’s a fun combo right there! It is similar to my wife’s ‘67 Cuda. 4*’s more cam in a Hyd roller and a few cubes down being it’s a .030-360. I just swapped on Trick Flow heads w/1.6 rockers. It really picks up well on the tach’s big end. A great street runner IMO.

Vertex_Jeff said
I built the car and motor back in 1999 / 2000, and it has been running ever since. I know there are "better" nasty street cams out there now, but I like this car the way I built it. I was 21 years old back in '99, and this was the first "nice" car I put together. Ripping in this thing takes me back a couple of decades when life was simpler!

LMAO! OH yea! The combo he has is reall a nice simple recipe that is fun. No doubt. I coupled mine with 4.10’s with the 4spd manual. Great fun!