[WANTED] 68 Barracuda Bucket Seat Base

-
Status
Not open for further replies.
68AusCUDA

68AusCUDA

Well-Known Member
Joined
Jan 21, 2016
Messages
58
Reaction score
21
Location
Melbourne
Rating - 0%
0   0   0
Contact seller
I need one bucket seat base for a 68 Barracuda, don't need rails, just the seat base, doesn't need to be covered/foamed. Needs to be shipped to Australia. Thanks!
 
To help you out, ALL 68-69 A and B body bucket seats used the same seat frames. So a bucket seat base from a 68-69 charger, road runner, etc would work as will one from a 68-69 dart. What makes them different is the seat tracks bolted to them and the upholstery on them. LH and RH 68-69 seat base frames and seat back frames are even the same part. There provision for locking latch on both sides. All done to save assembly costs.
 
moparmat2000 said:
To help you out, ALL 68-69 A and B body bucket seats used the same seat frames. So a bucket seat base from a 68-69 charger, road runner, etc would work as will one from a 68-69 dart. What makes them different is the seat tracks bolted to them and the upholstery on them. LH and RH 68-69 seat base frames and seat back frames are even the same part. There provision for locking latch on both sides. All done to save assembly costs.
Click to expand...

I had a feeling would be the case for A bodies, good to know, thanks!
 
Status
Not open for further replies.
-

Back
Top