Requested oiling mod info

Rat Bastid said

That’s kinda what I’m looking at. I’m thinking of clocking the cam bearings on 2 and 4 so it blocks the hole going up to the heads. I just need to spend some time looking for the right place to get oil to the rockers that doesn’t pull it off the main bearings or from the passenger side oil gallery. I already block the oil off to the lifters.

Click to expand...

.
If you do not want to drill into the main oil passage in order to provide full-time to the Head you can go to the back of the inside China Wall where the oil goes up to the oil pressure sending unit drill and tap. Then put a tee fitting there and then run a braided or steel line up to the passage that feeds the heads and you would have full-time oil pressure to both heads and you would not be tapping into the main oil galley.