Here is a build for you, as this is what i have in duster.
360, stock stroke & .040 KB107 pistons set at 0 deck.
340 rods (race prepped)
Lunati solid roller cam #60433 - 249/255 at .050 585/600 lift
Crane Ultra Pro roller lifters(no need to grind block, they just drop in)
Eddy heads(cleaned up & flowed) 270 on int. 205 on ex. @ 550 lift.
All new springs & retainers for the roller.
Had to redo the valve job as it was crappy out of the box.
Eddy Air Gap intake(port matched to heads) & holley 750HP.
Milodon oil pan, rollmaster timing chain, arp everywhere.
Idles at 850 w/ 9.5 in. of vaccum, soso w/ my pwr. brakes.
Dynoed @ 519.8hp @6250
495.9tq @4500
:cheers:
