Ok - this is going in a Demon that will be a primarily street driven car. 4spd w/ 8 3/4 rear. Full interior trim.
So this is my goal: 500hp from a 360-based small block (.030 over). Nothing exotic, and something that is streetable. I expect to stroke the motor. Most likely going with Eddy heads.
with that said, does anybody have a proven engine build that would get me close to or at 500hp? If not proven, any good suggested combos? the block itself was rebuilt and bored .030 over already - also line honed and decked. Looking to start w/ this block.
So, give me some suggestions on how to get there - including what type of headwork (if any), intake, carb, gearing, CR, etc.
One other thing, I've decided to go w/ XHD leafs w/ offset hangers/shackles.
Thanks!
So this is my goal: 500hp from a 360-based small block (.030 over). Nothing exotic, and something that is streetable. I expect to stroke the motor. Most likely going with Eddy heads.
with that said, does anybody have a proven engine build that would get me close to or at 500hp? If not proven, any good suggested combos? the block itself was rebuilt and bored .030 over already - also line honed and decked. Looking to start w/ this block.
So, give me some suggestions on how to get there - including what type of headwork (if any), intake, carb, gearing, CR, etc.
One other thing, I've decided to go w/ XHD leafs w/ offset hangers/shackles.
Thanks!