Search results for query: *

Price dropped. Need them gone!

Stock. I took them to a local head shop and just asked for a stock rebuild. Nothing fancy..

I have a good set of used 318 heads. I just pulled them from my truck today. They have about 5k miles from a rebuild, swapping to a set of Aluminum heads. Looking for local pickup Socal. $100 cash and a bottle of jack.. Please come take these off my hands. Need them gone!!!

Oh damn.... got it thanks

Okay I'll bite.. what did I miss or at the moment unaware of?

Does anyone know if the exhaust bolt holes on the speedmaster heads are wet or open to the water jackets like stock heads? Thanks

Seems to be a 7290 with exception of the snap ring location. This one is a captive (bearing cap face) snap ring vs. the inner snap ring (bearing cap base) ?? Chrysler 727 and 518 Transmission Yoke 7290 series

Sorry for the late reply. The cap size for the 904 is 1.075" And the 727 is 1.200"

IDK off hand, but when I get home I can post up the measurements for you.

Price reduced!

Sure. It's a 72 D100 318/396 stroker, it has a 8 1/4" rear with 3.21 gear, on a set of 20x8 wheel 275/50-20, the tire measure 30.5" tall. Its name is "Old Man" It's my daily.

Okay update! Modified the exhaust and hooked up the patc kit and Holy-**** I have over drive! It runs a drives so smooth, shifts feel stock... lol So happy I did this, Pain in the *** but feel well worth it.... super excited...

I have a new 904 yoke and a used 727 yoke. $50 +shipping each. Sorry don't know the part numbers of either.

...before I could even think about it I had the trans in and for **** sake, moving that crossmember worked like a dream. The 904 tailshaft was at 86* ^ and after install using the farthest mount point and moving the crossmember back 5" the 46rh tailshaft came in at 87* ^ and it doesn't look...

So I did a ****-ton of thinking an measuring and some drinking last night, and now I'm laying under my truck as I'm pulling the transmission and you are right. The stock crossmember and mount will push the trans to far up towards the floor of the truck... ugh so I start searching for a local...

...location for the 904 (currently in the truck) and the 46Rh soon to be in the truck is 1 1/4" difference. My intent is to spin the crossmember 180* and flip the spool mount itself to face forward. This will get me the inch backwards in length I'll need and hoping the slotted mounting holes in...

Yes prices are going crazy.. Build back better right? :wtf: I didn't I reused the OD spacer and thrust bearing for the apply piston.

Small update, I have the patc kit installed and the transmission ready. Install will be next weekend, then we'll find out just how much better the truck will be at higher speeds/ freeway speeds..

Well its a 32tooth setup and supposedly this computer is the has the correct setting for this setup BUT I can't get the damn thing to talk to my obd2 reader at the moment... ugh

Okay so it been a minute. I've been having issue getting this motor to fire. I have fuel, spark and air.. I get popping and the occasional back fire.. everything seems to be working "except" my obd2 reader can not connect to the ecu? not sure why.. I have two trains of thoughts... 1. the cam is...

I was able to finish the transmission this weekend. As I said before I wasn't upgrading the valve body but I did pull it apart and clean everything and inspect for any issues. I didn't find anything wrong but it was dirty. Got it all cleaned up and back together with out issue. I also received...

Naw, I watched a guy on youtube awhile ago while looking for transmission build info, build it and thought it was slick so I built one for myself. The youtube channel is "Transmission Bench" he makes how to vids for rebuilding transmissions.

On Sunday I was able to finish the initial build of the transmission. I still have the valve body to deal with an the install of the Patc kit. I'm not planning on installing a shift kit in it at the moment, but I will go through it a clean it up and make sure everything is in good working order...

Yesterday I received the needed forward hub spacer so I was able to finish putting the clutch pack together. Then I check the tolerance for both clutch packs, both well with in spec. waiting on a few more small bits but I'm hoping to finish then transmission this weekend.

Okay so after work I reassembled the over drive tail housing and got the measurements you needed. The hydraulic tubes extend past the edge of the case by 0.236" just under 1/4". I also got the measurement off the front case where the tubes intersect and it protrudes into the tale housing...

Sure thing, when I get home tonight I'll get a few pic's and the measurements you need! I got the hub from transpartsonline.com I'm also getting the front hub spacer from them as well.

Last night I went through and rebuilt the front pump and replaced all the clutch packs in the 1st n 2nd hub, only to find a missing plastic spacer in the front hub behind the wafer spring. It had been replace with a snap ring. So I order the correct spacer which now stall my build till I receive...

So I finally received the parts needed to complete the over drive build as well as the rest of the transmission. I was able to jump on the press this morning and finish the assembly of the overdrive clutchPak and planetary gears. When I get home tonight I finish the tail housing assembly. I've...

Geez thanks for making me feel like utter ****...:poke: I bet you guys don't have to pay for sex either!?!?! - Where the **** was your offering when I was looking for this trans last month asking everyone and there mother if they had one for sale... :p It was the cheapest at that moment I...

I've done a few and have seen wear but not at this extent... if you look at the closeup picture of the hub above, at the top plane of the hub you can see how the tooth is not only rounded on the edge but also worn to a saddle at the top of the tooth. I've never seen this before... Right...