Search results for query: *

If you want to reduce the prod angle & the amount of lift that is lost, you could use sol lifters. They should be shorter because they do not have the internal hyd mechanism. Just lash them tight, 0.006-8" at operating temp.

I live in a hot climate & use 10w/60 oil. On a cold winters day, it flows like a '10' oil to get to the engine components quickly. On a hot 40*+ C day, when I come off the freeway with a heat soaked engine, I have 30 psi at idle.......not 10.....

There you go...... Direct from Holley...... Since they make the carbs, maybe, maybe just maybe, they know how their carbs work..... Air bleeds: 'DECREASNG the size of the main air bleeds....will pull MORE fuel creating a richer fuel/air mixture'. A smaller MAB also starts the system earlier [...

71 deluxe wheel with individual horn buttons on each spoke

Why chance it? I put thread sealant on all those engine front bolts - it can't hurt anything...

I know that a lot of the back glass trim for a 4 door sedan, 2 door sedan is different from 2 door hardtop, but specifically is the stainless trim along the bottom of the back glass the same? is it the same between 2 door sedan and four door sedan? I'm working on a 67 dart two door sedan.

Help! I believe it was Saturday, I had to be somewhere important and tried to contact the seller. He was selling a windshield washer tank. My conversations had reached their limit (and I still haven't figured out how to delete them) and I had to go. I have since tried to find the post, looking...

I have great luck with Real Gasket thermostat gaskets... The valve cover gaskets, not so much. I also found that thermostat housings (Dorman?) from NAPA come in Cast iron instead of aluminum much less likely to warp and a brand new machined surface - worth the cost.

you can. it's a chunk of change, tho.

M&H produces harnesses that are EXACTLY like the factory harness - same connectors, same wire colors. You can use your factory wiring diagrams to diagnose issues. Be sure to call M&H before buying - they don't sell direct, but they are the most knowledgeable in finding the correct harness...

Can't you buy roller lifter retro fit kits made for earlier LA engines???

have you priced machine work lately? and lead times?? i don't know where you are, but in my neck of the woods it's pricey and the lead time is tremendous. anyway for the type of work you're describing, you'd be in aftermarket head territory-- or darn near.

Got the car back from the shop Monday. To say I have a few problems is an understatement. Not sure this is gonna happen but I will try. I know this is gonna be great when it is done but right now I'm looking at a long, long black tunnel with not light insight

I don't know about "any more" - I don't think it ever did. I put Dynamat sound deadening in my 70 Dart GT last year and tucked it under the brace all the way side to side on all the roof braces. I don't think the brace was meant to ever touch the roof. It would rattle like a giant tin can.

Love it!

Ok, I will take the pair of green ones if they don't work no big deal, I'll give them to someone that can use them. Thanks

yes, door panels. Very minimal with no padding

Wow, I can't recall ever seeing the buckle end on the outside of the seat (not that it's something I usually look at!) - I'll be looking for one at my next Mopar show.

I know this is basic, but the plate "reprograms" the hydraulics for firmer shifts and less slip. How it does that I have no idea, but I see other differences in the plates. Transgo has been around for a loooong time and is well respected. I installed my first Trans Go kit around 1982...

If you want to get your belts done, I can recommend Sharon's Web. Small family business in Hawkins TX. I found her at her booth at Carlisle and they are there every year. I sent her my old stuff, they disassembled them, repainted the lift plate and restored the mechanisms and then replaced the...

Pull the seats out so you can work on the engine??? Looks like it gives a lot more room. ☆☆☆☆☆

I happen to agree with you. In fact, I have stated it here before. Don't get me wrong, I bleed Mopar. I have had dozens of Mopars over the years. I have owned my 69 340 Barracuda for over 30 years. I DO like the new challengers, but I like the looks of the Mustang GT a little better, and I think...

My dream Stanley Cup Finals still has a chance. Dallas wins their game 7, now Bruins have to do the same. The Stars/G. Knights games were freaking physical. What a great series. Another goalie, other than Swayman that has been great in the playoffs is Oettinger. I think it might be Dallas' year...

Thanks guys, that solves that.

It is a 904 for a SB V8

what I am working on the past few days. Final product would be polished aluminum and either paint or powder for the argent and black painted areas. Here is the CAD drawing of the AC control panel: Here is the 3D printed plastic prototype, painted with markers, sitting in front of the dash...

I just cannot agree with fighting low oil pressure with a change in oil grade. But if it works, go for it. But it's not really "working".