Separate names with a comma.
Looking good Bill:)
Im still alive just BUSY:)
10W30 is fine ALL year long here. What ever flavor (Brand) you want or like. Use GM EOS for your additive about 2 OZ per oil change. This...
Charrlie S is in the 13s 1/4 mile. He is on here. His is street legal.
I was just thru there a couple of weeks ago too.
Another consideration with this project is the baffle, PCV provision and high lift cam/roller rocker provision.
Just my 02.
Well said Bill!!!
I have the hardened Gear oil pumps as well. Massaged for better more consistent flow. PM me for price and availability.
Yes . All replacement pumps are HV compared to the factory piece. You dont want a True HV pump its too hard on the drive gear. I have the hardened...
Get your set-up picked and use outlined and then we will talk cams. I dont like ANY of the "off the shelf cams" for a dollar build.
If you have your cam ground right why get 1.6 rockers? You dont REALLY need to sonic check your block. I have not seen a iron slant block yet that...
You will like the .104 over K1/Wiseco setup. I do!!!!
Im alive just moving slow. Thanks for the heads up Mike. Dennis I work on that quote over the next couple of days.
There is a REALLY nice write-up in the articles section of slantsix.org. You are going from the rope style to the rubber style. RTV will work fine...
We may not be able to communicate over the next few weeks. River has us cut off from everyone.
If your really concerned pull the valve cover and see that you have flow to the valve train. (do a valve adjustment while you are in there). You...
There are several Aftermarket Manifold that have heat provisions. Our Aussie Speed manifolds have a heat provision (as a add-on option). You pipe...
I believe it to be aftermarket. What I am not sure. Where does the other end go. As stated before might be some sort of trans cooler. Looks like...
Back off a little and give me a side view. Is that actually mounted next to the starter.
Slants tend to like more intake duration than exhaust. About 8-12 is typical. That is a REALLY mild cam. You will want to MEASURE your head and...
Yes OS valves in a number of configuration have been flow tested. IN A WELL PORTED head with proper induction, exhaust, and bore the increase is...
WOW NOBODY mentioned a QUINCEY. Its ALL I would ever own. Made in Quincey Il. 80 gal email@example.com 220v5hp. Got it delivered for $1800 Your...
Yes Rug the LONG runner will NOT clear the PB booster without an offset adapter. New Short Runner intake has no know issues clearing anything.
Slantsix.org is FULL of our beloved slant 6 info. 250 HP is a common figure.There are a number of vendors for speed parts. I represent one but...
That is correct The Aussie Speed line is the ONLY Equal length Production Manifold available for 2 bbl, 4bbl, or Blower use.
The Short Runner Aussie Speed intake is already out.
If you put the right cam in your slant there is NO reason to increase the rocker ratio. I see it as a fudge factor for a cam that didnt quite...