Separate names with a comma.
They turn up on ebay occasionally
Another option is to space the boards away from your siding which would add an air space and the rigid boards themselves would not come in contact...
cut the rigid boards and stuff them between the uprights then foil tape the seams , if you make them tight enough no need to fasten them in place...
30x40x10 walls and ceiling was $1750 5 years ago , including screws , washers , foil tape for seams and spray can spray foam for gaps in the...
Closed cell spray foam , not open cell is without a doubt the best insulation available for a metal building. However you have 4 issues , Cost...
Check out hunter panels polyiso rigid board . Available in many different finishes and thickness and also available fire rated and easy to install...
Have you tried the NOS mopar wire sets sold on ebay , they appear to have longer wires ?
Total waste of time making plug wires for a slanter. None of the make yourself kits will have the correct ends that have the spark plug tube seal....
sounds right to me.
I just set up a 340 w/273 rockers yesterday. 68-340 block decked about .006 , .053 felpros , j-heads , lunati hydraulic lifters. Perfect overall...
dot on the bottom = overlap , dot on the top = TDC
What model is it , those numbers don´t come up
Good luck with that.
360 viton rear main seal available either felpro or mopar performance
Nobody got no red viton 340 seal no more.
They are not interchangable either . The mounting pins are in different lacations.
Start with 76 IAB´s and work larger until you get a nice crisp snappy idle with mix screws between 1-2 turns out , of course assuming everthing...
WTF , that lower bolt looks like it could be 5/16 , I hope for you sake it is , that would be an easy fix , good luck.
Helicoil time , use 5¨x3/8 USS stainless as replacements.
Probably has #70 air bleeds in it . Thats what my 850 QF had in it , swaped sizes and ended up at around #82 I believe. Nice and crisp now with 4...
Is the drivers side 340 width or 318 width .
#1- tti , #2- dougs , #3 spitfire , thats it.
Long pop rivets from underneath to reinstall with windshield in.
5 bolts under the windshield rubber and 2 on the lower front.
earl a or early b ??????????
AFAIK no other cheap .040 head gasket available , felpro 1008 are like $40+ each , hope they are decent
Anybody using these head gaskets .040 compressed and a heckuva lot cheaper then Felpro . Rockauto has them on closeout at $8.61 each
8 burnt exhaust valves =low vacuum = shi##y idle