Search results for query: *

OEM Early 1970's V8 Auto Trans Kickdown Rod With Clip. It is original, not a china knockoff. It came off of a 1972 Cuda 340, but should work on several years and engines, and is in good original condition. $40.00. Local pickup, or buyer pays shipping.

This is a OEM Mopar 1970's Ignition Lock Cylinder w/key. This one came out of a 1973 Charger SE with a tilt column. According to my research this is the correct part for the following Mopars. 1972-76 A-body. 1972-74 B-body, 1972-74 E-Body with tilt column. It may be correct for other years...

This is a OEM Mopar Engine Oil Cooler #4140394. It came out of a late 1980's Plymouth Gran Fury Minnesota Highway Patrol Car with a small block 4bbl engine. It may work on other years and models as well. It is in good condition. $40.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Oil Dipstick. It came off of a 1969 440HP with the 402 oil pan, but may also work on other big block years and engines. This is just the dipstick, not the dipstick tube $20.00. Local pickup, or buyer pays shipping.

This is a Complete set of 34 OEM Big Block Cylinder Head Bolts. They are original, not china knockoffs, and are in very good used condition. Just need a cleanup. I know there are people out there who say you must buy new ARP when rebuilding an engine. All I can tell you is we reused OEM...

1969 Dodge Charger/Coronet Right Lower Dash Trim Bezel w/o A/C #2927870. It's not new, but is in good driver quality condition. $15.00. Local pickup, or buyer pays shipping.

This is a OEM Mopar 11 3/4" Flex Plate W/Bolts. It came out of a 1967 GTX with a 440hp engine, but will work in any big block with the 11 3/4" torque converter. It is original, not a china knockoff, and is in good condition. Just needs a cleanup. The 10 original bolts are also included...

This is a OEM Mopar Throttle Return Spring Bracket. It came off of a 1961 Plymouth with the inline dual quad 383/343HP engine. I believe this was the original bracket to the manifold, but I'm not positive. It has two holes for two springs, so it should work with many different inline carb...

This is a "Free" Couple Black Seat Belts "Free". I found these in one of my parts drawers. Not sure exactly what they are for, but if anyone has a use for them, they are free. Just pay the shipping cost.

This is a Pair of 1975 to 1979 Door Panel Courtesy Lamps. Mopar B-Body Charger SE, Magnum, and Cordoba Interior Part #3746013 & 3488994. These are complete with mounting hardware, and in good working condition. They may also work on other years and models. $20.00. Local pickup, or buyer pays...

This is a OEM Mopar Small Block Fuel Pump Eccentric. It is original, not a china knockoff, and is in good condition. Just needs a cleanup. It will work on most small block Mopar engines. $20.00. Local pickup, or buyer pays shipping.

This is a OEM Mopar Small Block Cam Thrust Plate. It is original, not a china knockoff, and is in good condition. Just needs a cleanup. It will work on most Mopar small block engines. $20.00. Local pickup, or buyer pays shipping.

This is a 1970's Big Block Right Side Valve Cover. It is original, not a china knockoff. It came off of a 1973 Dodge Charger SE with a 440 engine, but will work on many different years and models. It is in good condition, just needs a cleanup. 25.00. Local pickup, or buyer pays shipping.

This is a OEM 1970 to 74 Blower Motor Vent Tube. It is original, not a china knockoff. It came off of a 1970 Challenger SE big block with A/C. It is listed as the correct part for 1970 to 74 B&E Bodies, but may also work on other models It is in very good condition, and the rubber is still...

This is a 1973 to 1989 Mopar Small Block Fuel Pump. We bought it because we had no fuel to the carb. We thought it was the fuel pump. Bought this new one and installed it. Still no fuel. Turned out it was a clogged fuel line. Cleaned the fuel line and it ran. Took this one back off and put it...

This is a OEM 1968 to 72 Alternator Bracket For A Big Block With A/C. It is original, not a china knockoff. It is in good condition, just needs a cleanup. $15.00. Local pickup, or buyer pays shipping.

This is a OEM 1968 Big Block Right Side Valve Cover with PCV valve. It was painted black at sometime in it's life, so it will need to be cleaned and re-painted, but is in very good condition. $25.00. Local pickup, or buyer pays shipping.

This is a Partial Set Of 31 V.S.I. 303 Valve Spring Shims. There were 32, but apparently I lost one some where along the line. They are used, but in good condition. $10.00. Local pickup, or buyer pays shipping.

This is a Used Oil Pressure Gauge Sending Unit. It is for a oil pressure gauge, not a idiot light. I can no longer remember what year or model this one came out of, but I'm sure it worked or I wouldn't have saved it. $15.00. Local pickup, or buyer pays shipping.

This is a OEM Mopar 11 3/4" Flex Plate W/Bolts. It came out of a 1967 GTX with a 440hp engine. It is original, not a china knockoff, and is in good condition. Just needs a cleanup. The six original bolts to attach it to the crankshaft are included. $25.00. Local pickup, or buyer pays shipping.

This is a 1971 And Up SB Auto Trans Kick down Lever. This came off of a 1972 340, but I believe it was used on many small blocks in the 1970's. It may also have been used on some big blocks. $15.00. Local pickup, or buyer pays shipping.

This is a set of 1966 to 74 Big Block Alternator Spacers and Long Bolts. They are original, not china knock offs, and are in good condition, but could use a clean up. $25.00. Local pickup, or buyer pays shipping.

This is a Set of OEM Big Block (6 Bolt) Valve Cover Bolts & Nuts. They are original, not china knockoffs, and are in good condition, just need a clean up. $20.00. Local pickup, or buyer pays shipping.

This is a OEM Small Block Oil Pump Intermediate Shaft. It is original out of a 1972 340, not a china knockoff, and is in very good condition. It should work in most any SB Mopar. $40.00. Local pickup, or buyer pays shipping.

Can anyone ID this bracket? It has been identified as a bracket to relocate the ignition coil on a big block Mopar. Thank you R413.

This is a Old School Mallory Voltmaster high performance Coil, with the mounting bracket. Part #28675. It is in good working condition. $30.00. Local pickup, or buyer pays shipping.

This is a OEM Used Mopar 426w Throttle Cable. It came off of a 1964 Dodge with a 426w 4bbl engine. It is 20 3/4" long. I believe it will also work on the 66 to 70 big block engines with a 2 or 4 bbl carb. The outer coating has a small wear spot as you can see in the pics, but it functions...

This is a OEM Oil Slinger for Mopar V-8 Engines. It came off a late 1960's 440, but I believe it fits all Mopar V-8 engines from 1960 to 1978. It is original, not a china knockoff, and is in good condition. Just needs a cleanup. $15.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Oil Pump Intermediate Shaft. It is original, not a china knockoff, and is in good condition, but as you can see in the pics, it does have a few small spots of surface rust from sitting on the shelf for many years. It fits the 350, 361, 383, 400, 413, 426, and 440...

This is a OEM Mopar Small Block Distributor Hold down W/Bolt. It came off of a 340, but should work on most any Mopar small block. It is original, not a china knockoff. $15.00. Local pickup, or buyer pays shipping.