Separate names with a comma.
I believe gm masters were plumbed on the right.
Finding the right guy for the things I can't do myself. For me chrome plating and engine machining is the problem in my area. Its expensive to buy...
Nice old truck, It totes aluminum Hemi heads.
Yes going to paint them. Waiting for a dry day to sand blast them outside. I will probably paint the pipes and mufflers also. Cleaning up some old...
That's what I ended up doing. I used a couple lifter gally pipe plugs from the back of a big block. They were 3/8 npt. The cast iron was very easy...
Thanks, one of my never ending projects. Ten years or so ago I decided to put a 440 in it. Then a Dana, then a 4-speed. Time to make it driveable...
Put my Barracudas on hold again due to no parts money. This is a 56 DeSoto. Been collecting dust for a decade, trying to get a little further on...
Thanks guys, I think I'll cut it out and plug it so it won't leak or rattle down the road. New problem, In the top picture you can see the long...
I am working on a car I have decided to use a pair of truck cast iron exhaust manifolds. Mostly because these happen to fit where every header I...
When taking my 68 grill out I found it best to remove the entire header panel. I used a small wire brush in a dremel to clean the threads of the...
If the truck hoses are long you may be able to cut them down and have Napa crimp the correct ends back on them?
Ya, I had to put him down with my revolver.
Makes me feel like I'm the only slant killer on this site. I've tossed a rod on every slant I have ever owned. Mopars flat head six's too. Always...
Yes, full radius
I believe it was made special for the bicentennial. Package was dated 1976.[ATTACH]
Care to do a swap?
Found a NOS flex fan for my project.[ATTACH]
You really don't need to remove the glass or rubber for just a reseal if you didn't want to replace either.
C.R. Lawrence sells the liquid butyl and the pump can with a needle tip to get it under the rubber gasket. Also helps to heat the sealant up...
Chances are they won't want to save both the glass and rubber seal while removing. I would look over the rubber seal first and if nice save it...
74-75 imperial 9 1/4 Sadly it uses "C" clips to hold the axles in the tapered tube housing. Not really worth anything from a A body perspective,...
Of course cutting hurts the value. But your car really only has to make one person happy. You.
Copy the way it was built in 75 as close as you can.
The rustout in those photos was caused by a cheap replacement vinyl top that was poorly preped and installed. The original tops dont have that...
It was a 340 swinger that pulled me away from ford 30 some years ago. Congrats on the barracuda, you wont be missing that mustang. It took a 440...
I thought the 67 barracuda grills were all metal? I have 68s so they are the plastic finned inserts. They can be pretty fragile from age. The...
12v neg ground since 56
Petty's 43jr[ATTACH]
I had one of these many years ago.[ATTACH]
These are the older big block tall valve covers with some decent chrome left on them. I would use them on a clean driver type car myself. They...
