Separate names with a comma.
I always told wiggle the valve off the seat. Should be .002 to .005 clearance. Dip stem in motor oil, if play goes away your good.Tim
Got mine from Performance Automatic with some bells and whistles. You can buy a basic kit relatively cheap.
To go that far you might as well R&R the tranny for easier access. Just my .02Tim
Rebuild kit for the tranny or the motor?
Yep, 727. Ive got one just like it that came out of a 73 camper van .Im rebuilding the 360 that came out with it.Tim
I might be wrong but I believe you can work it from the trunk. It may be a little tight. Others may chime in.Tim
Thanks for the reply, RAT ROD AL got me fixed up. This forum is the best for info and members willing to help out. Happy Holidays to...
Just looking for a donor part to put a shift kit in. Might comb the local trans shops. Years ago I new some I could say I need and they would...
I am looking for a standard 727 valve body. Its a 1976 transmission. The valve body I have is in rough shape.Tim
I,m Calling on you 10,000 day calendar guys for help. The ID on my trans is 3898866 5192 8744. Best I can decipher is its a 1972 trans possibly...
Took the car of to body and paint. Thanks to Yocums Signature Hot Rods for coming thru. Today the engine goes on the stand. I'm off this week so...
When I replaced mine was during an upper cowl replacement. The corners on these cars are the worst because of clogged drains. Possibly a small...
Auto Body Specialist or maybe Classic Industries
I used an old maxwell house can still laying around. If I still have it Ill get a measurement this evening.
Projectile Dart is right. You also need some type of jig for housing to keep the flanges square during welding.Tim
Duh, Those were the air dams. The opening in the lower cowl is approximately 1/8" smaller.Tim
Believe it or not, its the diameter of a metal coffee can. I Had to rebuild both of mine and the original fit snug around the can.Tim
Andrew, as stated before, Its up to you how far your willing to go. Mopars aint cheap and early A,s are worse. The parts are out there you just...
Did not recall if they had a base gasket as mine were not on the fenders when I bought the car. Thanks for the responses.Tim
I am in need of a set of fender mount signal gaskets for a 66 Barracuda. Does any one repop these as well. Unable to find any.Thanks Tim
over head X2
10-4 I have a 66 Barracuda and thats how mine was routed. The new one will have better sheathing.Tim
Dont get to caught up. Take another set of trusting eyes with you. Look at the front cowl and under the dash board, under neath. Ve seen some cars...
Thanks for your post. We need to remember that this day led us into war. Fighting in two theaters at one time and becoming victorious.Tim
No car today. Its thanksgiving and Im going to spend the day with a small gathering of family.Tim
Street Demon, Holley,s version of a TQ hybrid.
Same here, I numbered mine as I didnt notice any color coding.Tim
You have a pretty good platform to start with. I started with the floor pans to hone my mig skills. When you get to the panels you,ll be on your...
Still waiting to go to paint. Working on heater box rebuild, rear cargo pan install and console.