Separate names with a comma.
Done some testing tonight, most definitely having a battery issue. I tested the battery with the key off 12.7 key on 12.5 when cranking it dropped...
Yea that's what I had to do.
Im subscribed.
That was the first thing I thought of! So I went inside and in park and neutral I can hear the relay click. In reverse and in gear there's...
That's the thing the relay is the original one. Been fine for 46 years been in storage the last 17 years it worked fine when first installed it...
Oh and on a side note I threw that same battery in my old trusty rusty 01 ram and it fired right off. It's running as we speak. I know the...
Done some test most definitely having a battery issue. I tested the battery with the key off 12.7 key on 12.5 when cranking it dropped all the way...
Im gonna run some tests hopefully here in a little while I just got off work I had to stop a get a few things at Walmart then I will be headed...
Yea noticed that too he hasn't been active since August. We had a pm conversation going right before then and he was busy with some other projects...
Man that i didn't know! I'm demoted back to newbie after all this! I had worked my way up to beginner but now I'm bumped back down lol. All jokes...
Ok thanks I will check that tonight.
Thanks man. I appreciate it. I got Del helping me out with the electrical im gonna run some tests tonight when I get off work. I'm thinking maybe...
I can't exactly tell where mine is leaking but its leaking from the inlet (circled in the picture) i can't tell if it's the big nut or the flared...
Its still there but the last two times iv used PayPal iv got charged a 1.50 fee. I was assuming it was because both times I was paying to cad I...
That looks fantastic! Nice work Fred!!
I can't tell if mine is leaking from the inlet or the fitting. If feels like the inlet to me because its leaking all down the back of the carb. I...
How did you fix the inlet leak? I tighten the crap out of it and it still leaked lol. I checked the gap and it's at about. 008. I can recheck it...
You know what the funny thing is? All this could have been avoided if I would have just listened to you 3 years ago! Lol
I had 13 at the battery after I charged it. Im not sure what's going on i think I got alot of problems just running together. I will charge the...
Yea It was getting gas it was squrting out of the carb good. I prefilled the bowls with a electric fuel pump and primed all the lines so fuel was...
I didn't even think of that good thinking!. Im gonna run some of the diagnostic that del posted and see what happens. I had 13v at the battery...
5 wire on a 5 wire box. I have a 4 pin ecu tried it too. Nothing.
I was very careful i only cranked it four or five times before stopping but I did that 3 or 4 different times. I never just let it spin and spin...
The battery did die during cranking. It turned over 4 or 5 times and I didn't get nothing so I stopped did some testing and tried again and...
Thats the thing that is so frustrating. Its all new. I spent the extra money to have new stuff to avoid this very thing. I have a new coil, new...
Oh ok lol thanks for the help really do appreciate it . Sorry i didnt even notice the standby lol
I checked it im at .008 thanks for the heads up
Thanks del for some reason there was a glitch in the matrix and I only saw the first sentence of post 10. Im not sure why. When I quoted you...
Ok thanks so now that I understand that part what do you mean by create a test gap?
This?[ATTACH]
