Separate names with a comma.
The Grilles aren't finished yet, but hopefully trying to shoot for Carlisle this year.Thank you, yes I do. I want to have it reproduced and...
Yes the msd is indeed hooked up to the battery directly for its power/ ground (12g wires). The ign turn on lead to the box (16g wire) I am...
I'm running a MSD ready to run Distrib E-curve as well as MSD 6al box and a MSD blaster 2 coil. Everything is wired up 100% per their...
Thank you! A lot of time invested in restoring the car, I honestly cannot wait to drive it.
Thank you!
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Got around to buttoning up the Fuel system, brake lines, and some other misc stuff. First time outside with...
Thank you! I used your thread on the milodon road race pan when I was choosing my oiling setup. A lot of good info on here
After looking at Drewmac's pic and seeing he went through the triangle shaped hole on the bracket, I ended up drilling that out and doing the...
I havent alligned the car yet, and Im raising the torsion bars up a little. with the valance on and the front raised it wont be that low. I've had...
I agree with you, it is low. My header collectors are probably just as low though. If this was an everyday driver, or tracking it with curbing...
I moved the brackets up on the k member like you're saying and when I did the bushings were pretty twisted and I didn't like how the sway bar was...
17x9.5 with 5.5 bs low pad height, 255 45 17 tires in the rear. Factory a body rear with bbp axles and dr. diff 10.7 rear discs. The body and...
Looks like Hotchkis changed the mounts for the clamps, They only have two holes on the side of the brackets now that do not line up with my...
That is an awesome picture. It must of been something to be around all these cars when new
The orig owner special ordered it and luckily i still talk to him often. He was kind enough to give me everything from the deposit to order the...
Thank you! I really hope so! It will be one hell of a ice cream getter
Thank you! It is my favorite spot in the house!
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] This is the car the first day the orig owner took the car home in 69. Bottom is me...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
With the light at the end of the tunnel in view, I figured now would be a good time to finally make a thread dedicated to the restoration of my...
Thank you!. I dealt with Mike at TTI direct, he sends you an invoice on Paypal and you pay through Paypal direct. Couldn't be easier. I didn't...
The reinforcement plate is where the seat belt bolt goes through. You either have the bolt in there or its not. Hard to tell from pictures. but...
Thank you! Car was repainted R6 in the early 90s, Im glad I put it back to the orig color
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
TTI was great to deal with and couldn't be happier with my purchase.My engine is a run of the mill 340 with x heads. Milodon Road Race oil pan,...
I bought their radiator for my 69 340 and couldn't be happier. Its one of the only aftermarket items on the car that actaully fit. I called them...
Fronts are 17x8 5.5BS low pad with 245/45/17 Rears are 17x9 5.5BS low pad with 255/45/17Hotchkis rear leafs, PST torsions and QA1 upper/lowers....
Haven't alligned the car yet, but with the engine/ trans weight in the car now I am really liking how it sits. Plenty of room off the bump stops...
