Search results for query: *

No, because what I am after was a very specialized application. Most transmission supply houses no longer stock hard parts for old 3-speed transmissions anymore. An odd extension housing and output shaft that hasn't been used for 45-years is not going to be around in a parts house. Their shelf...

That lathe has a hydraulic chuck on it. So long as you have the head of the bolt against the backstop it will clamp around the head of the 12-pt. just fine. The backstop is bolted into the chuck, threaded rod with two jam nuts and just adjust it out to get it in an area you like. Sometimes I...

I used a 5/8" collet and had a back stop inside the collet. That way I could shove the bolt head in and close the collet with repeatability every time. Touched off the parting tool at the end of the bolt and set X zero. Backed the carriage out and stepped over .118" for the parting tool and...

Still interested. Tom

Having just dealt with all of this I can tell you that the B&M 10230 internal balanced flexplate has two different diameter bolt patterns for 5/16" bolts and the smaller diameter for the 7/16" bolts. However the converter I bought has 3/8" bolts so I had to drill the 5/16" smaller diameter...

Still available Tom

Still available Tom

Still available Tom

Still available Tom

https://www.amazon.com/dp/B0CYL2X89N/?tag=fabo03-20 Tom

Still available Tom

Still available Tom

Still available Tom

Not degreeing a cam is a huge mistake a lot of guys make. You can never assume it's going to be even close. If you put a lower cost timing chain in they will stretch and you'll lose 2-3 degrees within a 100 miles. You don't have to pull the heads to degree a cam, but that's the first place I...

Still available Tom

Still available Tom

Still available Tom

Still available Tom

Still available Tom

Still available Tom

Still available Tom

You can store 1000 PM's instead of 10 You can refresh for sale ads every 3-day (your not allowed to bump at all otherwise). You can send photos in a PM (which you can't otherwise). Free Beer and Hookers on the first Friday of the month. :rolleyes: Tom

Still interested. Tom

Gen III Hemi 6.1 / 411" - 65 cc Heads, 13.5:1 Compression Ratio - Bore 4.085" - Stroke 3.900" Gen 3 Hemi Reluctor Ring - 32 tooth, or 58 tooth your choice 3.900" Molnar Chrysler EFI Hemi Crank w/ 2.100" rod pins 6.200" Molnar Dodge PWR ADRTM EFI w/ .927" Pin S/8 - ARP2000 Bolts DSS Pistons...

You can find out everything you need to know and have access to anything you need here. Dzus Fasteners Tom

Still available Tom

Still available Tom

Still available Tom

So is it okay to have a different one on an Only Fans account? Asking for a friend. :rolleyes: Tom

They all end up screwing you in the end, but compared to most the Spectrum that I pay $94 a month is pretty good. If I dump the TV portion ($27.95) which I plan to soon (because I have Netflix, Amazon Prime, and Paramount Plus already), so I'll then be paying $65.95 for 300MB Fiber Optic. Which...