Search results for query: *

  • Users: torredcuda
  • Content: Threads
  • Order by date
  1. torredcuda

    [FOR SALE] 73-76 master cyl and booster

    3580121 cast number on master, needs rebuild, not sure if booster is good or not, you get what you see, $60 + shipping from New Hampshire
  2. torredcuda

    [SOLD] 1970 Duster drag car

    `70 Duster drag only car, not street legal, good running mild 360 and nice shifting 727 with manual kit, 11" stall TCI converter, 6 pt roll bar, 8 3/4 rear with spool, aftermarket axles, SS springs, car runs low `13`s but I have been fighting it running too hot - 200 at top end so I haven`t done...
  3. torredcuda

    [SOLD] 1967 Barracuda steering wheel

    Original blue wheel from a `67 Barracuda, wheel has three cracks in rim at the spokes, worst one shown in pic, otherwise nice shape. $100 + shipping from Epping NH
  4. torredcuda

    [WANTED] Sharktooth grill

    Looking for a Sharktooth grill for my `70 Duster. It is a drag car so I don`t need a perfect one and prefer one that has damage/cracks and needs work.
  5. torredcuda

    [FOR SALE] 74 Dart Swinger

    For sale $2500 I was going to keep and fix for a daily driver but over $6000 in vet bills forces sale. 1974 Dart Swinger solid project. 318, auto, a/c, buckets, console, sitting for a few years but fires up with gas down carb. Has headers and dual exhasut, 4 barrell carb and intake. MSD...
  6. torredcuda

    [FOR SALE] `74 Dart Swinger $2500

    1974 Dart Swinger solid project. 318, auto, a/c, buckets, console, sitting for a few years but fires up with gas down carb. Has headers and dual exhasut, 4 barrell carb and intake. MSD ignition. Solid floors, frame rails, torsion bar mount, inner fenders, even trunk floor! Has small hole in...
  7. torredcuda

    [FOR SALE] 1974 Dart $3000

    For Sale - $3000 1974 Dart Swinger solid project. 318, auto, a/c, buckets, console, sitting for a few years but fires up with gas down carb. Has headers and dual exhasut, 4 barrell carb and intake. MSD ignition. Solid floors, frame rails, torsion bar mount, inner fenders, even trunk floor! Has...
  8. torredcuda

    [WANTED] 74 Dart rear bumper

    Looking for driver quality rear bumper for a `74 Dart some where close to New Hampshire.
  9. torredcuda

    74 Dart engine wiring diagram

    Anyone have a diagram for the engine wiring, 318 car?
  10. torredcuda

    Latest find

    74 Dart, 318, auto, a/c car. Needs lower quarters and some other work but oeverall a solid car. As soon as I get some free time I should have it up and running/ driving. I`d like to keep it for a driver but too many projects already so it`s gonna be for sale soon. Also needs a rear bumper - any...
  11. torredcuda

    [WANTED] rear drum brakes 8 3/4

    Need a complete set of rear drums including backing plates for an 8 3/4 housing, don`t care what size. Located in New Hampshire so prefer local due to weight for shipping.
  12. torredcuda

    Longer shocks?

    Looking for a shock for my Duster that`s around an inch longer than stock. I know that Mopar sells a drag shock for SS springs but wanted to find a cheaper one that will work. I heard that C-body ones are an inch longer but just checked NAPA and they list C-body ones at 13.625" and Dart ones at...
  13. torredcuda

    Northeast Mighty Mopar club show

    We have a date for our first show, September 12th, more details to come. https://www.facebook.com/pages/Northeast-Mighty-Mopar-Club/365435766974452?ref=aymt_homepage_panel
  14. torredcuda

    Reviving the Northeast Mighty Mopar club!

    Check us out, events coming soon. https://www.facebook.com/pages/Northeast-Mighty-Mopar-Club/365435766974452?ref=aymt_homepage_panel
  15. torredcuda

    [WANTED] 8 3/4 shock plates

    Need a pair with shipping to 03042, thanks.
  16. torredcuda

    Need some measurements-Sharktooth grill

    Need the measurements of one of the "teeth" or rectangles. Height, width, thickness and corner radius. Depths would also be good as I know there are a few different ones. Looking at the feasibility to try and build my own and trying to find some suitable material.
  17. torredcuda

    [WANTED] sharktooth grill pieces wanted

    Looking for a piece with one or two complete rectangles. Doesn`t matter which ones as I just need it for some measurements for a project.
  18. torredcuda

    [WANTED] Parts car wanted

    Prefer `70-72 but will consider any `70 up Duster, Dart or Valiant. I`m looking for anything from a fairly complete cat to a partially stripped one. I need some front end parts-grill, grill support/hood latch panel, headlight buckets along with some wiring, heater stuff, interior, windshield and...
  19. torredcuda

    Rim size and backspace, housing lenght for minitubs?

    Minitubbed `71 Duster, will move the springs inboard to the rails. Looking for widest wheels that still have decent tire clearance - 15-8.5" or 10"? Also need to figure out width for rear housing that will let me use standard offset/backspace wheels as I will be most likely buying them used so I...
  20. torredcuda

    Scammer?

    Got a PM from ra11, Roy Shelley, about a wanted ad, anyone know him? No posts and wants payment thru money gram so I just figured I`d warn anyone else getting a response from him.
  21. torredcuda

    [WANTED] 8 3/4 rear wanted for narrowing

    Still looking for either a rear already narrowed for a mini tubbed Duster or one from a c-body, truck or van I can narrow. To be specific so we don`t waste each others time here is what I need- COMPLETE rear housing, axles, and brakes minus the chunk. Axles NEED to be the non-tapered type so I...
  22. torredcuda

    Biuld worth-stock/clone vs protouring $$

    What would be worth more done on a `71 Duster originally /6, stock looking clone/tribute style or modern street machine/pro touring type build? I`m currently collecting parts for the build and since it will be for sale when it`s done to make some money need to know what direction I should go as...
  23. torredcuda

    Slot car guys?

    Anyone else into Ho slot cars? Here are some of mine-
  24. torredcuda

    [WANTED] Passenger side front frame rail

    Need complete, straight, passenger front frame rail for a `71 Duster. Some rust OK as long as it is straight and not bent from an accident ( like mine is! ).
  25. torredcuda

    [WANTED] C-body rear axle housing

    Looking for a complete 8 3/4 rear axle housing from a c-body to shorten for my Duster. Will consider whole parts car also. Prefer Nh, Mass area unless you can ship cheap.
  26. torredcuda

    [WANTED] 8 3/4 rear wanted

    Need an 8 3/4 rear for my `71 Duster project. Would like to find a big bolt pattern c-body unit out of a wagon or something so I can narrow it to the correct width for the minitubs or one already done. Located in southern New Hampshire so prefer within 100 miles.
  27. torredcuda

    My old Barracuda!

    http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=131010817104&item=131010817104&lgeo=1&vectorid=229466 Drivetrain was changed from a 360/727/8 3/4 but the paint and some of the custom features are still there.
  28. torredcuda

    K-frame engine mount measurements?

    Found a `70 v8 k-frame but the clowns torched the mounting pads on it to pull the engine. Anyone have a sketch and dimensions of the mounts so I could remake them. I work in a metal shop and can do my own fab so making them is easy just need to a drawing to go by.
  29. torredcuda

    Junk yard find

    Hit a yard yesterday I was told about by the kid I bought my `71 Duster from. Plenty of old stuff with a buch of Darts and Dusters, mostly /6 cars but there was one 340 Duster. Scored some parts including both 1/4 windows, a chrome mldg and a floor shift column and wheel out of the 340 car. I`m...
  30. torredcuda

    Need pics - red Dusters.

    I`ve pretty much decide to paint the `71 Duster I picked up red, just not sure what shade.It was originally Burnished Red but I`m thinking either Viper Red or maybe a darker cherry red.Whatever color I pick it will have a white stripe - show me some samples!
Back
Top