Separate names with a comma.
Hey guys,I'm looking for a v8 cable-style pedal and bracket parts to convert my '64 rod setup, hoping somebody has one they'd like to sell.Thanks!
Looking for a 7.25" cover and drain plug. Threads are stripped on mine. Thanks, guys.
Looking for a decent set of 198 rods for a 225 build.Thanks!
Hey Guys, I'm wondering if anyone could help point me in the right direction with an electrical problem I'm having. I've found similar issues guys...
Anybody got a claw style distributor hold down they'd like to sell? Looking to convert my 170.Thanks!
Hey guys, I read in a thread here that some of you have made a four barrel Holley carb work with the stock early model rod linkage and pedal, by...
Are the heat control valve springs and hardware reproduced? My 170 has no springs on it. The valve isn't seized, but has been stuck in the "cold"...
I'm looking for a set of 5 dash bulb sockets for 57 bulbs that would fit in my '64 Valiant instrument cluster. The metal contacts in mine have...
The wife and I picked up a 64 2 door post Valiant this morning! I've been looking for a slant car to tinker with, as my Dart project snowballed...
Hey guys, I'm looking for a set of 14" or 15" SBP rollers. I'm in the Tacoma, WA area.Thanks!
EDIT: Bought one, no longer looking. Thanks!Hey guys, I'm putting headers on my car and am looking for a right angle oil filter/hardware for my 318.
Hey Guys, I've got a '96 5.2 that I'm getting ready to build. The machine shop only had to hone the bores, so I'm using my OE pistons.I've read...
Externally this looks like a knockoff MSD vacuum advance distributor, but under the cap it doesn't look like any distributor I've seen. Any idea...
I'm trying to build a new transmission crossmember and in order to set it up, I need to fix my pinion angle. The previous owner installed some...
I'm looking for small block brackets for a non-A/C configuration to run on a Magnum 318 in my early.I need brackets for a TRW power steering...
My intent is to put the interior of my 66 GT back close to stock. I've got a lot of wiring and holes in the dash to correct. I am curious about...
Looking for a set of 273 / 318 early small block motor mounts.
Anybody have any idea what this console is out of? The lid is heavy die cast. I don't see any numbers stamped into it. This was in the trunk of my...
I recently bought a 66 Dart with a 225 in it. The PO said the top end had been swapped to the newer hydraulic style lifters.Well, the lifters...
Well, I posted some pictures of the car on my introduction thread but I suppose its time to start one to document my progress and...
Hello, I'm picking up my first A body this Saturday and I'm pretty excited. I've owned a few Dodge vehicles in the past (learned to drive in an 81...
