-
B
super six kick down throttle lever
Bulletin from back in the day. These things would get mixed up at factory too. Also the part about the lenght between holes center to center, important adjusting will not change lever ratio. That .130 too long is the thickness of a penny on top of a nickel.About 0128- Bugman
- Post #15
- Forum: Slant 6 Engines
-
-
B
super six kick down throttle lever
https://www.hamtramck-historical.com/images/TSBs/1971/D71-21-5%20Page%202.jpg- Bugman
- Post #14
- Forum: Slant 6 Engines
-
B
super six kick down throttle lever
Some of the end round holes were different sizes super six 1/4 others 5/16- Bugman
- Post #13
- Forum: Slant 6 Engines
-
B
super six kick down throttle lever
727 goes up 904 goes down. they start in the same plane but change direction just past the small hole- Bugman
- Post #12
- Forum: Slant 6 Engines
-
B
super six kick down throttle lever
on left shiny one bent to left 727 on right 904 bent to right this is done for clearance reasons- Bugman
- Post #11
- Forum: Slant 6 Engines
-
-
B
super six kick down throttle lever
different angles and lenght- Bugman
- Post #10
- Forum: Slant 6 Engines
-
B
super six kick down throttle lever
on the right 3751-551 2.40 between large holes on the left 2899370 727 tranny 2.61 between holes and bent wrong- Bugman
- Post #9
- Forum: Slant 6 Engines
-
B
999 lock up wiring problem
This placer has vacuum and pressure switches PATC Sells Transmission Switches for Dodge, Ford and GM.- Bugman
- Post #16
- Forum: Transmission and Drivetrain Tech
-
B
999 lock up wiring problem
at bottom of page A904 lock-up wiring - Page 2 - Slant Six Forum- Bugman
- Post #15
- Forum: Transmission and Drivetrain Tech
-
B
super six kick down throttle lever
Kickdown / TV Lever length and slot angle. - Slant Six Forum- Bugman
- Post #5
- Forum: Slant 6 Engines
-
-
B
super six kick down throttle lever
The angle is important throws lever forward ,rod is too short for straight lever ,lenght center to center of large holes 2.40 also important Is this a Super Six Kickdown? - Page 4 - Slant Six Forum- Bugman
- Post #4
- Forum: Slant 6 Engines
-
B
super six kick down throttle lever
1974 and up are part number 3751551 standard slant and 318 all bodies see this thread Is this a Super Six Kickdown? - Page 3 - Slant Six Forum- Bugman
- Post #3
- Forum: Slant 6 Engines
-
B
Still trying to figure out what AAWJ means on engine block.
Thats all the slant info- Bugman
- Post #18
- Forum: Slant 6 Engines
-
B
Still trying to figure out what AAWJ means on engine block.
AAWJ from huber foundry in Detroit- Bugman
- Post #17
- Forum: Slant 6 Engines
-
B
Still trying to figure out what AAWJ means on engine block.
From 1979 technical service bulletins Miscellaneous October 18 1979 number 26-02-79 subject 1979 vehicle identification numbers- Bugman
- Post #16
- Forum: Slant 6 Engines
-
-
B
Seat belt buzzer and light won't go off
Just a guess but check post 16 page 58 step 12A figure 15 jumper wire- Bugman
- Post #29
- Forum: Electrical and Ignition
-
B
Seat belt buzzer and light won't go off
page 10 H4 20 bk to heater or ac switch lamp S4 18 br/y to automatic park neutral ground switch- Bugman
- Post #22
- Forum: Electrical and Ignition
-
-
B
Seat belt buzzer and light won't go off
2 seat belt inter lock control modules, well hope there only one wiring diagrams. This is location- Bugman
- Post #19
- Forum: Electrical and Ignition
-
B
Seat belt buzzer and light won't go off
bulletin wire colors might be different- Bugman
- Post #18
- Forum: Electrical and Ignition
-
B
Seat belt buzzer and light won't go off
page 59 next wiring diagrams- Bugman
- Post #17
- Forum: Electrical and Ignition
-
-
B
Seat belt buzzer and light won't go off
out of order page 53- Bugman
- Post #13
- Forum: Electrical and Ignition
-
