Separate names with a comma.
A&A transmission in Indiana
Robert Is their 904 / 727 guy.
He will build you whatever you want.
I built my 904 myself and bought all parts from...
I'll take #6
Ok sounds good to me
If you could check on shipping I'd appreciate it.
Thank you for offering to send dimensions
Just don't really have the time...
That should work!
I see that it says 1000 lbs load
The boat I want to tow is about 1800
But even if I need to beef it up a bit somehow
My cam is on its third set of lifters
Break in the same as if both were new
Assembly lube and good high zinc oil.
Just my experience.
Can you post some pictures?
Still may be worth it to me.
Here's what I found so far..
So it looks like it bolts to the bumper
And floor pan?
Was it bolted outside or inside the
What year is the Dart it came off of?
I'm looking for a Trailer Hitch for my
Anyone have one?
I've talked with some local Shops about making a Custom one but I'm just seeing...
I think it's the same difference
Being in the upper plenum.
That makes sense
And it is plumbed to one runner.
Never really thought about it before.
I've been driving it with the booster hose plugged, it...
My 340 has recently been backfiring
Out the exhaust at slow speed when cold,
And running rough all the time.
Wound up being the brake booster...
I've had my valve covers off at least 20 times with these gaskets never a leak!
Been on my Engine for 5 years.
That is with cast aluminum...
I'm glad you were able to find the problem.
I recently rebuilt my transmission and it also was too brutal for me on the 1-2 & 2-3
Check grounds, make sure their clean and tight.
If you haven't already..
Also that you have ground strap from Engine to body/firewall.
Just my experience,
When my 727 in my 340 gts
Got tired I didn't have the money to rebuild it.
I had a simi fresh 998 from a 1987 dodge truck with...
I was able to put the heads on in the car,
But I cheeted I set the heads on first then threaded the studs in just like bolts...
Not sure if I...
Here's the correct bolts if you want instead of studs.[ATTACH]
I used studs on mine from Summit.
Just put this one in my 904 from a and a $25
Comes with an O ring and the clamp and bolt.
This morning I received a response from Timken
I was Happy they took the time to look at the pictures I sent.
And to get back to...
Well I guess I'm the only one that thought it was strange the way this bearing wore only in one perfectly proportioned spot on the inside race....
Yep I agree
I already replaced both bearings last night.
The spindle was fine too.
I just posted the bad bearing to see if anyone had come across...
I guess anything's possible, just weird to me that it would spin smooth for 2 years then decide to eat itself last week?
And only tear up a...
Plenty of grease, and just barely snug on the nut.
Looks like a manufacturer issue to me
By the way it's only on one section of the race.
Last week my 69 dart started making a loud howling growl inside the car.
It was hard to tell where it was coming from.
After putting it...
You can swap axles yes.
That will also give you way more wheel selection.
I haven't and I'm ok with small pattern
Plus nobody wants to steel...